pine_guy
Member
- Location
- North Cumbria
Lely robot for sale at start of the dairy sale tomorrow at Carlisle.
£10.50 per liner, aftermarketDo any of you guys running Lely bots know how much your paying for liners? I got a recent bill but I’m hoping it’s a misprint.
£10.50 per liner, aftermarket
The green ones ?£10.50 per liner, aftermarket
I haven't bought any in a while but thought from memory they were 65ish?You don’t know how much the silicone ones off Lely are?
I haven't bought any in a while but thought from memory they were 65ish?
Hi guys. Any of you are milking with the Gea Monobox? If so what is your opinion on the robot? Ty very much
Hi guys. Any of you are milking with the Gea Monobox? If so what is your opinion on the robot? Ty very much
I know that the mIone from Gea had a lot of problems but I thought this problems were fixedImagine quite a few GEA robot owners don’t look at the robotic milking thread anymore....... Not sure about other countries but terrible reputation in the UK.
Best of luck , that is a great shedA new chapter on my farm starts tomorrow with start up of 3 M2s , a trioliet auto feed system and a joz bot scraper. This is a culmination of nearly 15 years work and dreams. 125 cows from parlour and 49 from my 10 year old merlin; installed in the bitter cold of dec 2009/jan2010..
Thankfully there's little chance of -10 degrees.
I have found this thread very helpful over the years . Now it's time for me to turn info into real life .
Wish me luck!! View attachment 838407
A new chapter on my farm starts tomorrow with start up of 3 M2s , a trioliet auto feed system and a joz bot scraper. This is a culmination of nearly 15 years work and dreams. 125 cows from parlour and 49 from my 10 year old merlin; installed in the bitter cold of dec 2009/jan2010..
Thankfully there's little chance of -10 degrees.
I have found this thread very helpful over the years . Now it's time for me to turn info into real life .
Wish me luck!! View attachment 838407
Good luck with that. A great looking set up and as others have said, will have you in tears in no time once it’s covered in sh!t.A new chapter on my farm starts tomorrow with start up of 3 M2s , a trioliet auto feed system and a joz bot scraper. This is a culmination of nearly 15 years work and dreams. 125 cows from parlour and 49 from my 10 year old merlin; installed in the bitter cold of dec 2009/jan2010..
Thankfully there's little chance of -10 degrees.
I have found this thread very helpful over the years . Now it's time for me to turn info into real life .
Wish me luck!! View attachment 838407
Now continuously repeat for around a week.9.5 hours to push 170 through 3 bits and ensure feeder system was working properly..
Robots and support team performed perfectly. Onky a few cows jumped the gates..
Knackered