Roller Doors

[texelburger]

HI, wondering if any one can help.Were looking to replace the doors on one of the grainstores and need some advice as to the best companies to get quotes from.Thanks in advance.

 

[S J H]

Shutter door services of chorley have been good to us.

I've been a job and they've been using Ambassadoor from Whitney, they seem a good firm,

 

[Barleycorn]

Rodor are excellent.

http://www.ro-dor.co.uk/

 

[Derky]

Avon doors, look after all of ours and we have 19 use the best end of the market for components. Do not use industrial door services (ids) cheap for a reason.

 

[texelburger]

se the best end of the market for components. Do not use industrial door services (ids) cheap for a reason.[/quote]
Have had a quote from Avon, they seem a well organised company.Have had another quote which is about 25 % cheaper, same gauge steel.Cant decide as cheaper is not always best.

 

[Penmoel]

We have had good doors and service from these
http://www.ardion.co.uk/

 

[texelburger]

We have had good doors and service from these
http://www.ardion.co.uk/

Might give them a ring tomorrow or tuesday, thanks.

 

[Bob c]

same as @S J H says ..............Ambassadoor from Witney Oxfordshire

 

[Derky]

se the best end of the market for components. Do not use industrial door services (ids) cheap for a reason.

Have had a quote from Avon, they seem a well organised company.Have had another quote which is about 25 % cheaper, same gauge steel.Cant decide as cheaper is not always best.[/quote]
Check what motors and gearboxes they use if its ellard walk away.

 

[Hilly]

Emmerson.

 

[Barleycorn]

se the best end of the market for components. Do not use industrial door services (ids) cheap for a reason.

Have had a quote from Avon, they seem a well organised company.Have had another quote which is about 25 % cheaper, same gauge steel.Cant decide as cheaper is not always best.[/quote]
Probably like everything else, buy cheap buy twice.

 

[fermerboy]

Had a quote off of P&K Shutters recently.

Are they any good? Just wanted an idea of cost really.
Girl I spoke to on the phone was spot on and quote was quick. Just need to find cheaper delivery
Any other good supply only companies? Nearer Scotland the better.

 

[jamesy]

Put a roller door from them up. Is fine, they were by far the cheapest quote I got

 

[herman]

Had a quote off of P&K Shutters recently.

Are they any good? Just wanted an idea of cost really.
Girl I spoke to on the phone was spot on and quote was quick. Just need to find cheaper delivery
Any other good supply only companies? Nearer Scotland the better.

 

[herman]

P&k are a good firm and supply good doors' we have 6 off them and will be ordering 2 more soon for the next project.

 

[texelburger]

Thanks for all your replies, we have gone for shutter doors near Preston, Lancashire.The main reason was they were recommended by a local builder and, also, the local independant car repair garage has had about 5 doors fitted by them.