Roller gate track


So I’m bolting down some 75mm x 6.5mm flat wit 18mm round welded to it to run gate wheels on. It’s in to farmyard wit no major traffic maybe 6 trucks per year. Question is 700mm spacin either side of round adequate Boltin down wit 12mm diameter anchor bolts?


  • image.jpg
    255.5 KB · Views: 0


Tough one ! What has more strength? A pair every 700 or staggered at 350? Not sure of the answer but I would have thought either should be fine .

Make Tax Digital Software Poll

  • Quickbooks

    Votes: 34 16.6%
  • Sage

    Votes: 20 9.8%
  • Xero

    Votes: 95 46.3%
  • Other

    Votes: 56 27.3%

Man fined £300 for bonfire-related waste offences

  • 241
  • 0
Written by William Kellett from Agriland

A man has pleaded guilty at Newtownards Magistrates’ Court to waste offences relating to a bonfire next to the electrical sub-station on the Circular Road in Newtownards, Co. Down.

Gareth Gill (51) of Abbot’s Walk, Newtownards pleaded guilty to two charges under the Waste and Contaminated Land (Northern Ireland) Order 1997, for which he was fined £150 each and ordered to pay a £15 offender’s levy

On June 25, 2018, PSNI officers went to Gill’s yard, where they found a large amount of waste consisting of scrap wood, pallets, carpet and underlay.

Discussion with Northern Ireland Environment Agency (NIEA) officers confirmed the site...