Roller shutter door advise

off set the channel to the same line as inside of gable posts ,leave 15mm clearance to get side panels behind channel ,finish the gable post half on the gable post you will have room to put angle on to carry door track it will impede opening by about 30mm if you using 100mm wind lock guide

Like that?

IMG_0682.JPG
 

Pan mixer

Member
Mixed Farmer
Location
Near Colchester
If you have the internal option surely you will lose a lot of height on the door as the corner of the shed will be eaves height only?

Maybe the shed is 12 m high?

To answer original question, I would fix the track to the stanchion, it doesn't matter if you see the end of the panel, or shroud it with tin but the track (the vulnerable bit) will be protected from reversing out vehicles by being behind the panel end IYSWIM.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 80 42.3%
  • Up to 25%

    Votes: 66 34.9%
  • 25-50%

    Votes: 30 15.9%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,293
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top