Rossmore Loader Brackets

[Trench Box]

I had a 1994 Same Antares 104 tractor which I got rid of but kept the 2 year old Rossmore FL60 loader as it is like new. I have all the brackets, pipes and control lever. Will these brackets fit any other make of tractor as they are or will they have to be modified??

 

[Mur Huwcun]

Will fit a few different models from same stable but not any other makes, Explorer 80, 90 and 100 and upto more recent models and Lamborghini 774-80, 874-90 and Formula 105 and Target 95 etc. Willalso fit the equivalent Hurlimann models

 

[Trench Box]

Will fit a few different models from same stable but not any other makes, Explorer 80, 90 and 100 and upto more recent models and Lamborghini 774-80, 874-90 and Formula 105 and Target 95 etc. Willalso fit the equivalent Hurlimann models

Thanks for the reply, I will keep that in mind when I go shopping

 

[Mur Huwcun]

Thanks for the reply, I will keep that in mind when I go shopping

They won’t easily fit the Silver/Premium 4 cyl range though and no chance to fit Dorado/ Sprint/ R2 and R3 either

 

[Trench Box]

Will fit a few different models from same stable but not any other makes, Explorer 80, 90 and 100 and upto more recent models and Lamborghini 774-80, 874-90 and Formula 105 and Target 95 etc. Willalso fit the equivalent Hurlimann models

They won’t easily fit the Silver/Premium 4 cyl range though and no chance to fit Dorado/ Sprint/ R2 and R3 either

Will they fit a 1994 Same Antares 110 tractor?? Just came across a clean one

 

[Mur Huwcun]

Will they fit a 1994 Same Antares 110 tractor?? Just came across a clean one

Unfortunately not, an Antares110 will be a large chassis 6 cyl model. You need brackets for 110/130, Silver 110/130 or Formula 115/135 or 1100/1300 or R5 130. Just be aware that there was also a 4cyl Silver 110 aswell later on in life, around 2006!!!

 

[startinghandle]

Unfortunately not, an Antares110 will be a large chassis 6 cyl model. You need brackets for 110/130, Silver 110/130 or Formula 115/135 or 1100/1300 or R5 130. Just be aware that there was also a 4cyl Silver 110 aswell later on in life, around 2006!!!

Why not alter brackets to fit ??

 

[Trench Box]

Why not alter brackets to fit ??

Is this possible??

 

[Mur Huwcun]

Why not alter brackets to fit ??

Nothing is impossible but you would need to alter them a lot to go from a relatively compact 4cyl to a much larger 6cyl chassis in order for the loader to reach the floor and pass the front of the bonnet!!! I can’t think of an easy way of doing it as they won’t bolt onto front axle bolster or bellhousing as they are even. To alter brackets you usually try to line something up and bolt it on as a starting point. Ford brackets were quite handy ones to re jig usually.

 

[Trench Box]

Thanks for the advice lads