Timbo
Member
- Location
- Gods County
After a rear door ram for a JD 572 (or 570 / 580 / 590 / 582 / 592 )
Burden bros
Got one off a 550. Will check the dimentions to see if it's the same if you can't find one off a later model.After a rear door ram for a JD 572 (or 570 / 580 / 590 / 582 / 592 )
Got one off a 550. Will check the dimentions to see if it's the same if you can't find one off a later model.
I knew it!!! I had a 580 and for no reason it would bend a ram, I would take them off and straighten them in a press and refit them 180 to how they bent. It would go ages then for no reason it would do it again.
In the end i took the rams to a local hydraulic place and they said the caps were worn so they made me a pair of brand new rams, guess what...... For no reason it would still bend the new ones so the baler went up the road!!!!!!
Got pair off a 582 & one of 550 here willing to part with.After a rear door ram for a JD 572 (or 570 / 580 / 590 / 582 / 592 )