Round baler pto

[twizz]

Morning the rattle clutch on my round baler has bust. Can anyone point me in the direction of a used 1 with wide angle joint and a rattle clutch/ cam clutch

 

[Matthew Britton]

Morning the rattle clutch on my round baler has bust. Can anyone point me in the direction of a used 1 with wide angle joint and a rattle clutch/ cam clutch

surely you just need the end with the clutch? W/A joints are rarely available secondhand and if they are they are extortionate as new they are normally £1000 plus. You should be ok for getting the clutch end I would have thought. Try Dave at Burden Bros on the isle of Sheppy Kent 07770814967 or 07796684647 are the two numbers stored on my phone for him, hopefully one of them works!! There are not many models they haven't got there!!

 

[twizz]

surely you just need the end with the clutch? W/A joints are rarely available secondhand and if they are they are extortionate as new they are normally £1000 plus. You should be ok for getting the clutch end I would have thought. Try Dave at Burden Bros on the isle of Sheppy Kent 07770814967 or 07796684647 are the two numbers stored on my phone for him, hopefully one of them works!! There are not many models they haven't got there!!

Got the mechanic on with it but he says that 3 supplies are saying October at the earliest for the clutch

 

[Matthew Britton]

Burdens must have 50 or more round balers being broken. Give them a try.

 

[john432]

I presume it's a cam cut out clutch. Need 3 details, the torque setting of the clutch, the shaft spline size on the baler,and the UK cross size. Then it should be easy to source.