RTK Farming

[PJ Walker @ RTK Farming]

What kit do you have as casts vary. Also you can go down the modem route which can be considerably cheaper than radio on initial setup.

Nobody's answered that yet.

Going to be about 2.5k to go from centerpoint to rtk.

Don't know if its worth it. Subscription saving will be £300 per year so 8 years to cover that.

Will own radio receiver though.

£1800 unlock is the killer. Can't transfer it to other machine either as its part of tractor.

 

[Matt77]

Nobody's answered that yet.

Going to be about 2.5k to go from centerpoint to rtk.

Don't know if its worth it. Subscription saving will be £300 per year so 8 years to cover that.

Will own radio receiver though.

£1800 unlock is the killer. Can't transfer it to other machine either as its part of tractor.

I might be wrong but doesn’t the unlock go with the receiver, I’m only using Case branded trimble stuff but I can move the receiver between two machines.

 

[Chae1]

I might be wrong but doesn’t the unlock go with the receiver, I’m only using Case branded trimble stuff but I can move the receiver between two machines.

Not sure. Will ask. Be great if it did. Ours is NH Trimble.

 

[PJ Walker @ RTK Farming]

If you have a NH Trimble 372 then you can swap it between other NH equipment providing it is autosteer Ready. The unlocks are for the receiver regardless of what machine it's on.

Not sure. Will ask. Be great if it did. Ours is NH Trimble.

 

[Matt77]

Not sure. Will ask. Be great if it did. Ours is NH Trimble.

Same stuff then, again I could be wrong but I brought the radio and unlock code and use the same receiver on two machines running RTK

 

[Slick]

The receiver is in display on CFX/FM 750, FMX/FM 1000, TMX/XCN 2050.
If you have an AFS or Intelliview display the receiver is on the roof in the 252/262/372.