Running hydraulic motor from power beyond

[cosmagedon]

Has anyone run a motor through power beyond? I'm thinking to pipe it up, from the P port into a on/off valve, then through a pressure compensated flow control valve, tee off after this with one going to the LS port and the other going to the hydraulic motor and back to the return.

I think it should work the only thing I'm unsure of is if another service is operated and the pump goes to full pressure will the compensated flow control valve be able to stop the motor surging up and down as the pressure spike would be quite severe.

 

[del_boy]

Has anyone run a motor through power beyond? I'm thinking to pipe it up, from the P port into a on/off valve, then through a pressure compensated flow control valve, tee off after this with one going to the LS port and the other going to the hydraulic motor and back to the return.

I think it should work the only thing I'm unsure of is if another service is operated and the pump goes to full pressure will the compensated flow control valve be able to stop the motor surging up and down as the pressure spike would be quite severe.

The hydraulic fan on our pottinger c6 drill can be used with power beyond. Its got a on off tap on the feed and load sensing line and can be used with a spool instead by turning the load sensing tap off. Its also got a flow restrictor valve to regulate the flow and also a accumulator in the line. It works fine for drilling rape and corn. If you want some pictures just shout

 

[cosmagedon]

The hydraulic fan on our pottinger c6 drill can be used with power beyond. Its got a on off tap on the feed and load sensing line and can be used with a spool instead by turning the load sensing tap off. Its also got a flow restrictor valve to regulate the flow and also a accumulator in the line. It works fine for drilling rape and corn. If you want some pictures just shout

That would be brilliant if you could please [emoji106]

 

[del_boy]

That would be brilliant if you could please [emoji106]

I'll take some in the morning for you.

 

[del_boy]

Sorry for the delay i been struggling to log on.
Ive put a yellow cable ties on the supply line and green ties on the ls lines for you to follow if the photos are any good

 

[Mur Huwcun]

This is interesting as I’ve often though the same myself but never really came up with a plan of how it would practically work!!

 

[cosmagedon]

Brilliant pictures thanks [emoji106] It's plumbed up just as I though then bar the addition of an accumulator.

 

[del_boy]

Ive no idea what pressure is in the accumulator but i can find out if you wanted. When i use the fan on power beyond i just turn the load sensing tap on and off and that stops the fan. I only use it when the tractors dont have enough spool valves for all the drill functions.