Rwms...

[Farmerboyben]

Good afternoon

I currently compete with a ts59 on a mf135 with tcns.

Have recently purchased a set of rwms and want to use them.. have been advised to put on a different plough to the 59.. I do have a ts90 12” that I can adapt. What’s my best options apart from spending thousands on a ts86??

Thanks.

 

[Tonym]

Do the rules allow you to use them on a TS59 or any other plough apart from a TS86 which could be supplied with RWMs when it was new?

 

[Mydexta]

I think you need more clearance for rwms than you will have with either a 59 or 90, but @Howard150 will confirm if that is true.

plenty folk have modified 59s to a similar spec of an 86 which would allow you to use rwms.

or, alternatively, you could use them on a ts63

 

[Farmerboyben]

Thanks for the replies. What’s the difference between a ts63 and a ts64? Could they work on that?

 

[Dealer]

Do you have legs and frogs for rwm,s ?

Legs are different from anything else even tcn legs for ts86,s wont be right

You will need a longer frame as the boards will pile up between them otherwise

You could buy a wrights frame but would need other bits

Howard 150 is the man for legs should you need some.

 

[Farmerboyben]

Yes they are complete with legs. Frogs. Stays. Points. Adjusters. Etc.

Desperate to get something sorted

 

[Mydexta]

They might fit on a 64.

if I remember correctly, you will need at least 30” clearance between the points in whatever frame you use

 

[Farmerboyben]

They might fit on a 64.

if I remember correctly, you will need at least 30” clearance between the points in whatever frame you use

Ok thanks!! Any info greatly appreciated.

 

[colhonk]

Farmerboyben TS 63 is a long frame for long boards, TS 64 is a short frame with longer legs for short digger bodies

 

[Mydexta]

Farmerboyben TS 63 is a long frame for long boards, TS 64 is a short frame with longer legs for short digger bodies

some 64s have the same clearance as a 63.

there’s loads of them up this neck of the woods

 

[Howard150]

Good afternoon

I currently compete with a ts59 on a mf135 with tcns.

Have recently purchased a set of rwms and want to use them.. have been advised to put on a different plough to the 59.. I do have a ts90 12” that I can adapt. What’s my best options apart from spending thousands on a ts86??

Thanks.

Sorry but missed this post.
A 59 does not have enough interbody clearance. The legs are wrong and will not put the body far enough back which will mean the front disc won’t fit.
A 63 will work with some jiggling about of the front disc although the bodies might well not be in the right place relative to the tractor. Some 63’s are drilled to put the legs in different places along the frame.
A 90 at 12” is a waste of time. RWM’s plough best at 10 1/2.
Ideal plough is an 86 with the correct legs which is what they were made for. I have legs for both TCN’s and RWM’s. Will probably have an 86 early next year as well.

 

[Farmerboyben]

Thanks for the reply. I think from the replies I need to be looking for an 86.. what sort of money would you be looking for, for your 86?

 

[gavts86rwm]

Thanks for the reply. I think from the replies I need to be looking for an 86.. what sort of money would you be looking for, for your 86?

Rwm was aloud to be used on a ts86 as manufactured which u would not be able to use in the nationals

 

[Dealer]

Depends on the class

Classic class is fine

Multi uk champions have used rwms on ts 86,s

 

[Howard150]

Depends on the class

Classic class is fine

Multi uk champions have used rwms on ts 86,s