Same Silver Brake Lights Problem

[walesfarmer]

Recently bought a Silver 105. Brake lights have stopped working on tractor and through 7pin plug, with and without attached implement plugged in. Have checked the 'stop' fuse and no problem there. Haven't a clue where to start looking- possibly faulty sensor etc. Does anyone have any ideas where to look/check?

Handbrake sensor for dash warning light is also intermittent but I presume that should not affect it.

Thanks in advance!

 

[Cowabunga]

The obvious place to look is the brake light switch at the top of the pedals.

 

[GarethT]

We had the same problem earlier in the year with our silver 105. There's a switch around the pedals (I don't remember exactly where without looking) that failed on ours. Have similar issues with the some of the dash lights that you mentioned too!

 

[Mur Huwcun]

99.9% it’s the switch on pedal. Switch has 4 pins and two wires, swap the wires over for a reversed operation. Light will be on with pedal up and will go off when pressed. That will determine if the side of the switch that is in use is goosed!