I have a Plantman 2 264 1989. Truckmasters at Skegness told me to fill up the spout on the side with ATF until its full, there is no sight glass or dipstick. I only knew it was low because it was sluggish pulling away.
Ok thanks
Where should I look for the spout to top up.
Can’t see anything
View attachment 1001058Is it this shape ? If so, there are two bolts at the back of the cab to remove, then tilt the cab forward to access gearbox and torque converter dipsticks. If it’s the later shape, I can’t imagine they were much different.
Thanks thanks found it.Sticks out the side of the box at the bottom. Probably got a bsp plug in it, 1" socket or spanner required. I think it will be on the right hand side if its same as the telehandlers.