Written by Administrator
One of the UK’s leading manufacturers of vegetable harvesting equipment has launched an innovative conversion kit that allows owners of the GRIMME GT 170 trailed harvester to convert seamlessly to a fully functioning windrower without modifications to the host machine.
Designed in response to local growers where the Grimme GT170 is their preferred choice of harvester, the Scotts GT170 Windrower conversion kit directly replaces the elevator module. As the kit is attached to the harvester through existing elevator fixing points, there is no need to modify the host machine and thus can be returned to its original set up quickly.
Derek Scott, managing director of Scotts Precision Manufacturing says: “Our customer had tried other windrowers but was disappointed with the conveyor design or the performance of the machine in general so asked us if we could think of a way of converting their stock GT170, and this is the result. It wasn’t at all straightforward but we are really proud of how we have been able to create a conversion kit that is easy to mount, easy to use and easy to remove. This is the second machine we have converted for the same grower, the first was a lot lower spec host GT170 with limited cleaning and although performed well in average conditions fell down when 2019’s extreme harvesting conditions began to bite. This second conversion was installed on a much higher performing harvester with a digger web and double separators, even though the conversion kit has only been used locally, it has attracted a lot of interest, and we’ve had several strong enquiries, which tells us it should be a popular addition to our range.”Scotts’ conversion kit features a 5.3m long cross conveyor that allows the lifted crop to be moved gently over the two rows next to the machine and deposited into the centre of the next pair of rows. The hydraulically powered conveyor can be positioned to discharge on the left or the right of the windrower. The conveyor has five sections and features self-cleaning and a soft low flighted 790mm wide sheeted PVC web.
The conversion kit integrates into the GRIMME control box, with the tip ends controlled by the original elevator swanneck up/down control switches. A separate left or right diverter valve is operated from an in-cab toggle switch within a 4″ PVC control box that is held in place with magnets. Scotts has utilised the main elevator section to control the left and right movement of the conveyor. The conveyor belt drives via the original elevator web drive and the toggle switch mounted on the control box.
A maximum of six 36″ rows can be lifted without moving the crop twice, which is beneficial to the user when making an opening for the harvester and the trailer. An additional benefit of the new kit is that the offside wheel can remain in its original position as there is no need to dispense the crop into the valley where the wheel runs.
Scotts has ensured that the drop height is as low as possible as both ends of the conveyor feature a hydraulic ram, which allow the tip end to be lowered.
Scotts Precision Manufacturing Ltd
The post SCOTTS INTRODUCES ITS GT170 WINDROWER KIT appeared first on Farming Monthly National.
Continue reading more content from Farming Monthly...
If you are enjoying what you read then why not considering subscribing:
