Seazed balls

[glasshouse]

What to heat, the ball or the arm?

 

[bobk]

Just put something on and give it some work

 

[glasshouse]

Just put something on and give it some work

Cant get anything on!!!!

 

[Wesley]

Cant get anything on!!!!

Stick something in it…buckrake tine etc.
The longer the better

 

[Welderloon]

Try to descale the ball as much as you can first - grinder, flap disk/wirebrush (needlegun would be best) then play heat on the outermost parts of the arm trying to keep the heat away from the ball as much as possible.
Try to get the ball in the opposite position to where it is now, descale again then it should free off with a bit of work

Once it starts moving, keep tapping the arm to get the black dry rusty sh!t out of the housing

 

[Hilly]

Just put a bar in and work it free .

 

[glasshouse]

 

[Hilly]

Have you ran out Of oxygen ?

 

[Wesley]

Have you ran out Of oxygen ?

Things have got serious! Looks like he’s attacking it with napalm.

 

[glasshouse]

Bent fork tine

 

[glasshouse]

Try to descale the ball as much as you can first - grinder, flap disk/wirebrush (needlegun would be best) then play heat on the outermost parts of the arm trying to keep the heat away from the ball as much as possible.
Try to get the ball in the opposite position to where it is now, descale again then it should free off with a bit of work

Once it starts moving, keep tapping the arm to get the black dry rusty sh!t out of the housing

If i could move it, it wouldn't be siezed, would it?

 

[Agri Spec Solicitor]

We had a top link like that, left it in diesel all winter. Eventually it moved with a crow bar and hammer.

 

[DrDunc]

Heat the arm to make it expand, not the ball

And use a blue flame until the arm is glowing red. You might as well pish in the snow if you're just covering things in soot off a yellow flicker

Remember, nothing is siezed if it's liquid

 

[bovrill]

Big hammer!

I'd clean up the bits I can get to, then put a bar through and keep smacking it hard with hammers. No.4 copper on the ball itself and a 3 or 4lb long handle one on the bar.
The top one might have some joy using a pointy bar as a chisel.

Eventually give up, cut them off and get a pair of weld on replacements!

 

[feilding]

Heat it up and melt candle wax into it, works well on seized threads , got me out of trouble scores of times

 

[glasshouse]

Big hammer!

I'd clean up the bits I can get to, then put a bar through and keep smacking it hard with hammers. No.4 copper on the ball itself and a 3 or 4lb long handle one on the bar.
The top one might have some joy using a pointy bar as a chisel.

Eventually give up, cut them off and get a pair of weld on replacements!

Cant get a bar through!!
I got a bar through thr other one and reversed against the shed stansion.
This one is turned round do a bar wont go in. I got tip of bale spike in but just bent it

 

[DrDunc]

Cant get a bar through!!
I got a bar through thr other one and reversed against the shed stansion.
This one is turned round do a bar wont go in. I got tip of bale spike in but just bent it

This on your old ford?

Cut the buggers off and weld on some hook ends

Life is too short for fixed balls!

 

[crashbox]

Heat the whole thing and quench as fast as you can with a bucket of cold water: often cracks the bond.

 

[DrDunc]

 

[glasshouse]

This on your old ford?

Cut the buggers off and weld on some hook ends

Life is too short for fixed balls!

Looking for hooky arms already