Silage pusher

[valtraman]

I’m looking to make a silage pusher , I have things lying about to construct one either from an old axle with wheel or a yard scraper. Either way I ideally want to not have to uncouple shear grab to put in something, just something I can slot tines into and push along then just drive out and leave it. I don’t have centre passages so only pushing up one side at any time . Could do with some pictures or designs I could look at . Simpler the better

 

[Limcrazy]

Had this with slots for tines or palletforks and was a right pita to get on and off and wouldn't sit well to work either. Cut them off and put brackets on it and a drop down stand and it is much better to use and I have grab off every day anyway. Used a tyre off manitou and an old muck spreader axle and some other scrap.

 

[Horn&corn]

Prefer an angled blade myself as tyres don’t seem to work on our wetter mixes

 

[Dog Bowl]

Had this with slots for tines or palletforks and was a right pita to get on and off and wouldn't sit well to work either. Cut them off and put brackets on it and a drop down stand and it is much better to use and I have grab off every day anyway. Used a tyre off manitou and an old muck spreader axle and some other scrap.

I'm amazed you manage to get that silage pusher to fit on that loader tractor in your photo