Niall310
Member
I came across these photos of our Herron we refurbed 3 years ago so I thought I'd add them here for anyone that's interested.
The high sides had been bowed out, the top and bottom of each extension was rotten and the latch for the grain door was bent and the bosses holding it rotted through too.
We cut out the top and bottom rail of the sides and welded back in 3mm box-section at the top, and 3mm folded plate at the bottom, this was originally 2mm sheet.
2 of the sides weren't rusted and were just straightened,
We squared up the front board and made a mesh extension for the side.
We added LED marker lights and tail lights while we were at it.
Then a sand blast and respray.
The high sides had been bowed out, the top and bottom of each extension was rotten and the latch for the grain door was bent and the bosses holding it rotted through too.
We cut out the top and bottom rail of the sides and welded back in 3mm box-section at the top, and 3mm folded plate at the bottom, this was originally 2mm sheet.
2 of the sides weren't rusted and were just straightened,
We squared up the front board and made a mesh extension for the side.
We added LED marker lights and tail lights while we were at it.
Then a sand blast and respray.