Slurry pump reverse gear box

[Cluster_monkey]

Evening, have a pump like the photo and wanting to run it off front pto, were could I get a gearbox to replace original to do this and what do I need to ask for? Cheers

 

[mixed breed]

Sometimes it's possible to change the position of the gear on the output shaft from top to bottom which changes rotation direction, weather thats possible with that particular box I don't know.

Kramp do a range of right angle boxes for various hp requirements and you can specify direction of rotation

 

[Cluster_monkey]

Do I need this sort of thing?

 

[davidroberts30]

how much horsepower does that pump take?

most front pto's are only rated for about 70hp

 

[Cluster_monkey]

how much horsepower does that pump take?

most front pto's are only rated for about 70hp

Says in the handbook 60hp to run? It’s only for stirring slats /pumping into tower Not a big underfloor slurry store stirring model

 

[Munkul]

We used to run a pump like that for pumping into tower, 135 with 45hp managed it just fine, also used to run it in 1000 speed ticking over with 390T, you'll be fine with a front PTO

 

[Barleycorn]

We wanted a replacement gearbox for our wholecrop header, but all the available ones were the 'wrong way'. Finished up buying a 3 shafted box to get the right drive.