This looks very much like the one on the back of my Joskin.
Slurry tanker dribble bar
- Thread starter dgjeynes
- Start date
ridger
Member
- Location
- Tyrone, Northern Ireland
That looks good, if it has a mascerator on it
- Location
- Co antrim
Any idea of price for that nc design?
- Location
- East Tyrone
Is Slurryquip the fella that originally started Slurrykat?
James
Member
- Location
- Comber, Down
Yeah think so
Ben_Willcox
Member
We are plenty busy enough, we can also fit a Mastek in 3 hours on farm. Would like to see anyone fit a SlurryQuip in 3 hours.
Attachments
ridger
Member
- Location
- Tyrone, Northern Ireland
How well do they last on rough lanes bouncing constantly? Genuine question
Ben_Willcox
Member
No problem at all with rough terrain, take a look at this video
Where are you from? Can get a customer reference for you to talk to if it helps.
Last edited:
James
Member
- Location
- Comber, Down
Can you fit a mastek to this herron?
Attachments
- Location
- Ballyclare Northern Ireland
It doesn't really matter how quick you can fit them, that's unimportant its how they perform, what they are like to live with and what price they are is important.
Ben_Willcox
Member
I don’t disagree, Mastek have been supplied hundreds of retro fit dribble bars across Ireland, the UK and numerous other foreign markets. Give me a call on 07930876941 to have a chat ?
Ben_Willcox
Member
Yes we can fit a dribble bar to this Herron tanker, please send me your number on a message and either myself or someone will call you.
slurryquip
New Member
Ben Wilcox , SLURRYQUIP cannot fit a dribble bar in 3 hrs , we wouldn't even think of trying to . We believe if a job is worth doing it is worth doing right . ! Slurryquip dribble bars are CHASSIS MOUNTED, NOT BACK DOOR mounted.
We have got this fitting done to a fine art , but we do not see it as a race , far from it , we firmly believe it has to be properly fitted to last .
Our dribble bars are forward mounted for balance , 50 mm pipes, still able to access tank without having to remove dribble bar , breakaways also work when vertical ,less tail swing , more weight on drawbar ,2 yr warranty on blade wear ,optional auto reverser and spreading computer.
We have a virtually unrivalled 28yrs experience , only beaten by Spreadwise by 1 yr !
We have got this fitting done to a fine art , but we do not see it as a race , far from it , we firmly believe it has to be properly fitted to last .
Our dribble bars are forward mounted for balance , 50 mm pipes, still able to access tank without having to remove dribble bar , breakaways also work when vertical ,less tail swing , more weight on drawbar ,2 yr warranty on blade wear ,optional auto reverser and spreading computer.
We have a virtually unrivalled 28yrs experience , only beaten by Spreadwise by 1 yr !
Attachments
slurryquip
New Member
A few videos of Slurryquip that are worth a look
regarding a question someone asked in an earlier post , yes I am the man who started slurrykat .
regarding a question someone asked in an earlier post , yes I am the man who started slurrykat .
- Location
- Ballyclare Northern Ireland
I was examining your work and speaking to one of your salesmen at fintona. Quite impressive and simple, good attention to detail. Only thing I would have liked was to have seen a cutaway of your macerator or have one open to see as it is a very important part. But overall I liked it.
I have one and the only thing that blocks the macerator is steel. There is a video on line of an open one chopping timber , I’d say if you just google slurryquip macerator it should show up, or maybe slurryquip could put the video up here .
James
Member
- Location
- Comber, Down
That video is up here
It doesn’t matter how quick it takes to put on , it’s far more important how long it stays on for. Don’t go out through a rough gateway with a hollow in it between two fields with a mastek, I was talking to a man who did , when the tractor went up on to higher ground raising the front of the tank while the wheels of the tank were in the deepest part of the gateway the dribble bar was so far back that it caught the ground and pulled it off. Some mess.
- Location
- Ballyclare Northern Ireland
Have seen the video but my point is when you have a display stand it would be nice to be able to see the inner workings and have a poke at it in the flesh so to speak.