Software update charges for gps receiver/tractor Massey 7718 Omnistar G2 ???!!!

phr49

Member
Location
Ely
Wondered if anyone had experienced charges for software updates for GPS equipement .
Recently told needed an update from supplier because there was some problems reported with equipement working as it should .
Was nt expecting a bill of £164 nett of tax for a frigging software update .......:mad:
Anyone else had simular with Masseys/Omnistar ??
Do run a JD also ......DIY updates for them ............
 

phr49

Member
Location
Ely
You can’t update AGCO C3000 style receivers on your own. Needs to be done with a dealer laptop.

Was it done in isolation or together with other service work? Did they travel to you to do it?

Done in isolation travelled 10 mins to tractor location took about 45 mins to do .
Tractor was serviced few weeks back 1500 hrs at dealer to keep with warranty conditions ..
 

PSQ

Member
Arable Farmer
Apologies for the hijack.

@Pheasant Surprise I don't suppose you know how to upgrade an older CSI Wireless 'DGPS Max' to be able to receive Egnos corrections from PRN136?

CSI Wireless no longer exists, so no updates from them. I'm guessing it's only going to be usable with SBAS from now on.

IMG_8036.jpg
 
Apologies for the hijack.

@Pheasant Surprise I don't suppose you know how to upgrade an older CSI Wireless 'DGPS Max' to be able to receive Egnos corrections from PRN136?

CSI Wireless no longer exists, so no updates from them. I'm guessing it's only going to be usable with SBAS from now on.

IMG_8036.jpg
Sorry afraid I don’t. There may be a (hidden) menu to change the satellite PRN to the current SBAS satellites in use, but I wouldn’t be able to tell you how to find it.
 

Speedstar

Member
Location
Scottish Borders
Wondered if anyone had experienced charges for software updates for GPS equipement .
Recently told needed an update from supplier because there was some problems reported with equipement working as it should .
Was nt expecting a bill of £164 nett of tax for a frigging software update .......:mad:
Anyone else had simular with Masseys/Omnistar ??
Do run a JD also ......DIY updates for them ............
What age of tractor was that on ?
MF are having problems with the software at the moment
 
Apologies for the hijack.

@Pheasant Surprise I don't suppose you know how to upgrade an older CSI Wireless 'DGPS Max' to be able to receive Egnos corrections from PRN136?

CSI Wireless no longer exists, so no updates from them. I'm guessing it's only going to be usable with SBAS from now on.

IMG_8036.jpg
Found it! @PSQ

You will need to connect to the serial port of the DGPS Max using a USB to serial converter hooked up to your laptop and run up a terminal session to connect to the receiver.

Then issue a $JWAASPRN command to change the configured PRN numbers for EGNOS.

See page 43 and 44 from the CSI programming manual for the unit:

So the command you would issue at the prompt, would be: $JWAASPRN,136,123 and hit enter after it.

Screenshot 2019-09-30 at 16.39.20.png
 
Last edited:

Will you help clear snow?

  • yes

    Votes: 70 32.0%
  • no

    Votes: 149 68.0%

The London Palladium event “BPR Seminar”

  • 13,942
  • 223
This is our next step following the London rally 🚜

BPR is not just a farming issue, it affects ALL business, it removes incentive to invest for growth

Join us @LondonPalladium on the 16th for beginning of UK business fight back👍

Back
Top