sproket for bunning

[joe soapy]

Just wondered if anyony has sourced alternative sprokets for floor chain

 

[biggles]

They aint to bad on price for genuine, last ones I had were about £100 a piece I think.

 

[joe soapy]

They aint to bad on price for genuine, last ones I had were about £100 a piece I think.

Quoted 158 this morning

 

[Mur Huwcun]

They're called gypsy wheels if you're struggling to identify them off other companies

 

[Zebbedee]

Try sas spreaders

 

[pine_guy]

Try sas spreaders

+1 good stock and service. Although the invoicing has something to be desired.

 

[joe soapy]

Thanks for the SAS , they got them in stock and good price
01263 861500

 

[biggles]

Thanks for the SAS , they got them in stock and good price
01263 861500

how much ?

 

[joe soapy]

101 i think + carrige and vat

 

[Mursal]

Try Kramp on line catalogue download, they do sprockets .........

 

[pine_guy]

Try Kramp on line catalogue download, they do sprockets .........

And pay for the service in my experience. great for getting you out of a hole, but last time I priced a part at Kramp (nylon coupling off a drive shaft), sourced it faster and less than half the price through a local bearing/belt supplier.

 

[Mursal]

Was that before or after discount?
They are trade only here, so you need someone to get it in for you?

 

[joe soapy]

Did try Krampe, we did not have a meeting of minds, they more dealer orientated

 

[pine_guy]

That was through my mechanic, two man oily overalls hands on team. prices are normally very keen.

 

[Mursal]

Best to download the correct Kramp catalogue, see it listed, then order using part numbers through an account holder.

 

[joe soapy]

bits turned up after lunch, good service

 

[joe soapy]

Computers is wonderfull things, went to local back street bearing supplier that i use, asked for a pair of bushes for shaft,
I have had them before, he looks on computer and says " that the ones you had in 2007 ??"

 

[joe soapy]

changed the fiber bearings for bronze, £16 each, the ones fitted in 2007 are still like new.
Can be got much cheaper by the 100, started looking at other machines where they could replace ball bearings and give less problems
Which all machines were as cheap as bunnings to refurb

 

[RLC]

...just a sh!t job changing the gypsies etc. Make sure you do gearbox seals whilst your in there.
Where you get the bronze bushes
? If they were like new why you change them!??[emoji848]

 

[joe soapy]

...just a sh!t job changing the gypsies etc. Make sure you do gearbox seals whilst your in there.
Where you get the bronze bushes
? If they were like new why you change them!??[emoji848]

Premier bearings plymouth, just tell them the same as you supplied to farmer a month ago and in 2007.
New ones were fitted to the sechond spreader, its getting like a retirement home for bunning spreaders that refuse to die