Stable partitions.

[masseyman74]

I am just in the process of having a shed finished. We need to put up two stables in there. Just looking for the best place to buy these from. If anyone has recommendations I’d be pleased to hear from you.
Many thanks.

 

[Farmer Fin]

Depends how much you want to spend! We just put up some Hancox ones. They supplied and we erected. Everything as it was supposed to be. Only issue was waiting time and a few delays. Mrs is happy.

 

[masseyman74]

Something cheap sounds good to me. Mrs won’t agree but she doesn’t know that I’m getting these. I think she was just going to fix up some gates and make it up with plyboard.

 

[Loftyrules]

IAE were the cheapest a few years ago and then Monarch price matched them (reduced their quote by £5k)

 

[Farmer Fin]

IAE do bog standard ones. Cheval Liberte similar.

Hancox or Monarch do a range of stuff. I found monarch difficult to deal with.

Loddon are top of the range.

All have decent websites.

 

[masseyman74]

Blimey. There not cheap then ?

 

[Farmer Fin]

Sheet some gates with stock board and tie a ribbon on then! That was our mark 1 version.

 

[Farmer Fin]

Blimey. There not cheap then [emoji15]

Is that IAE or Loddon?

 

[masseyman74]

I haven’t enquired about prices yet. I was going to go and see leech brothers about them making me up some as I need them 15x15

 

[Cab-over Pete]

We made some about 17 years ago.

Load of 2x2 inch box section, 2 inch weld mesh and 3/4 inch plywood for the bottom half. Made doors and everything to split a 30x30 ft shed into four stables. My brother did most of the fabrication and I helped fit them.

Still going strong and looking good.

 

[RhysT]

Keep an eye on eBay for second hand stables. Bought 3 second hand loddens for about £800.

 

[Fergieman]

Moorland Stabling Overview

Moorland Stabling fronts are available with bottom swing door only, anti -weave sliding door or full height anti- weave swing door

iae.co.uk

We put in 4 IAE stable fronts and sides, using the shed wall for the rear. They make them as 10' 12' or 14' as standard.

 

[masseyman74]

Many thanks for that. I will make some phone calls in the morning. I’ve put sockets in the ground at 15ft apart as I thought we would just use box post and gates. But I reckon I will earn some brownie points if I get some more substantial stables.

 

[Fergieman]

The IAE ones bolt to the ground and walls, no sockets required.

 

[honeyend]

I have second hand Loddon ones bought of ebay, and they are seriously well made and heavy, hardwood in fill. Cost £2k for three stables, 12x12

 

[masseyman74]

I wounder if we could modify them to use the sockets as it be ashame to bolt them to the ground.

 

[Loftyrules]

How come you’re going 15x15 tend to find they use more bedding and are messier with that size where as 12x12 they don’t circle as much

 

[masseyman74]

I wasn’t around when they put the sockets in. They spoke to my mrs and she thought it be nice to have a bigger stable. If I had my way it would be a 12x12.

 

[betweenthelines]

Need to be removable. Nothing worse than trying to extract a dead horse from an odd shaped stable!

 

[Cab-over Pete]

Don’t start!