Starfire auto steer

cla2170

Member
Fairly new to autosteer, got drilling today and working fine but wandered if there's any way to mark out say a 12m headland so I know where to lift drill? Drill is 4m. Thanks
 

KB6930

Member
Location
Borders
What screen?

I can do tramlines on my 2630 and my 4240 but couldn't on the integrated 4600 on 6155 .

I've not figured out the inner headland line on the 2630 yet but don't really need it
 

Attachments

  • 16163216988402799756101284213219.jpg
    16163216988402799756101284213219.jpg
    180.1 KB · Views: 0
Last edited:

Brisel

Member
Arable Farmer
Location
Midlands
You can mark out tramlines on the newer screens. I've never tried on a 2600 & we never bothered anyway. The drill wasn't Isobus & did its own thing. The sprayer had the normal AB lines.
 

Phil P

Member
Arable Farmer
Location
North West
Just note the OP is on a 2600 screen and I’m pretty sure you can’t highlight tramlines with a 2600 screen.
He’ll be running on gs2 software which is pretty old hat (we’re on gs4 now) and I don’t think it’s supported with updates any longer.
As for internal boundaries I honestly can’t remember if it’s possible on a 2600, best to consult the book. It will be in the boundaries section.
 

Northdowns Martin

Member
Arable Farmer
Location
Snodland kent
Just note the OP is on a 2600 screen and I’m pretty sure you can’t highlight tramlines with a 2600 screen.
He’ll be running on gs2 software which is pretty old hat (we’re on gs4 now) and I don’t think it’s supported with updates any longer.
As for internal boundaries I honestly can’t remember if it’s possible on a 2600, best to consult the book. It will be in the boundaries section.
We use internal boundaries for drilling on 2600 screen. Looks like @KB6930 demo was using GS3 software
 

Phil P

Member
Arable Farmer
Location
North West
I can make them but will mean driving round the field again by the looks of it which I'm not prepared to do for no good reason. The newer screens just do it automatically off the boundary
Thought you could put an internal boundary in on a 2630 🤔, just put a headland offset in?
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.0%
  • Up to 25%

    Votes: 66 35.1%
  • 25-50%

    Votes: 30 16.0%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,291
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top