Steel draw runners

[casemx 270]

Any ideas I want to build a steel draw for a project but I need some steel draw runners total weight around 15 kilos.
Thanks

 

[Welderloon]

I normally use small sealed bearings for runners

 

[winchman]

Plenty on Ebay mixed quality in the past we have bought something just for the steel or parts and used them to make something else as it was better quality or cheaper. As above angle iron and a small chaeap bearing are easiest

 

[trev7530]

Think RS components do them

 

[ED.D]

Try these;

Categories & Brands | Sliding Systems

gsfslides.com

 

[B R C]

I’ve got a load of second hand 800mm 100% extension good for 100kg I think, I’m going up your way tomorrow, got a job at Trafford Rowing Club on Monday, also have new ones 800mm and 1000mm 100% extension.

 

[gmgmgm]

Screwfix/others stock kitchen ball-bearing runners e.g. Blum/Hafele which would easily handle 15kg. Would they work?

e.g. https://www.screwfix.com/p/hafele-soft-close-ball-bearing-drawer-runners-450mm-2-pack/9653p
Picked at random: Pair of slides with 35kg capacity, 450mm depth, soft-close

 

[TheTallGuy]

https://www.amazon.co.uk/gp/aw/d/B07Z4KXQ22/
https://www.amazon.co.uk/YENUO-Drawer-Runners-Extension-Bearing/dp/B09VPDFKXN/

 

[Bob c]

Shop - GSF Promounts

gsf-promounts.com

 

[casemx 270]

Thanks all given me some good ideas

 

[Gapples]

Thanks all given me some good ideas

Don't know if you got sorted but looking at your requirements small baler ram bearings would probably be ideal.
Quite pricey though but build to take a lot of punishment.