Steel frame building 120' x 40'

[Chuckie]

I'm after some prices for a new straw building, spec as below:

120' long, 40' wide, 22ft eaves height, 20ft bays
F/C roof, natural grey colour with 10% rooflights, wood purlins

No side cladding needed, But I require 1 long side and 1 gable end to have cleats welded to the stanchions @4ft centres down to 6ft above ground level for future yorkshire boarding. That gable end will also need a post (or 2) in the middle also with cleats on.

The other long side will need cleats welding on for future yorkshire boarding down to 6ft below eaves height, the other gable end will need drop posts or whatever you call them down to 6ft below eaves.

Hope that makes sense!

1. Price for kit only, delivered to South Preston PR5 area

2. Extra cost for erection, it's a good level, hardcored site, we have a digger here for digging the holes etc

3. Extra for galvanised steelwork

@RWG Contracts

@BobGreen

@Graham Heath Construction

@anyone else!

Cheers

 

[RWG Contracts]

 

[Chuckie]

ps I've already got planning permission, so there won't be any delays waiting for that

 

[roscoe erf]

@Thick Farmer

 

[Thick Farmer]

£20k for kit.

 

[SimonB]

Hi, Mark is working on your price and it will be over later today.

 

[SimonB]

@Chuckie - can you private message me your full postcode, name and an email address and we'll send it over!

 

[D.hughes industrial doors]

What about Shufflebottom?

 

[Blue.]

@Chuckie did you get a quote off Bits Welded All over?

 

[Chuckie]

@Chuckie did you get a quote off Bits Welded All over?

NO

Still to make a decision on this, a couple of forum members are still in the running, along quotes from elsewhere, interesting how the spec and price can vary so much for the same shed......

I won't be going with the cheapest price though, smaller steel and timber than anyone else, don't want it to sag in a couple of years

 

[Derrick Hughes]

Can you let us know who gets it, steel thickness is one to look out for

 

[JNP]

How are we fairing up with the quote @Chuckie ? Would be happy to discuss any aspects with you.
01568 600518

 

[Chuckie]

Can you let us know who gets it, steel thickness is one to look out for

Will do, when a decision has been made!

How are we fairing up with the quote @Chuckie ? Would be happy to discuss any aspects with you.
01568 600518

PM sent.

 

[Andrew1983]

Where did you go with this @Chuckie? Planning a similar shed for straw too with future plans to side sheet etc.

 

[Chuckie]

Where did you go with this @Chuckie? Planning a similar shed for straw too with future plans to side sheet etc.

Still to make the final decision at the moment @Andrew1983 , a few other things have had to have priority lately, but hoping to have it sorted soon!