Sumo Trio, wide or narrow wings?

Hello all, what’s your opinions in the differences between wide and narrow wings for the Sumo Trio?

What’s the difference in how it works with different wings?

Obviously I know one is wider than the other haha!
 
depends on your land and what your wanting the machine to do

Cheers Bob, we have a mixture, no sand, easy working limestone to blue clay, We’ve been using wide wings since we bought the machine in 2010. I have, let’s say... inherited the job now and was wondering which wing for which land?
 
And how deep you want to go, shallow = wide and deep= narrower
200 mm wings move all I want to

Edit, I'm on the metcalf NG system so have a fair choice of wing sizes

Thank you. Sorry I missed this post.
Sounds good, we generally just work just below traditional plough pan for the given field. So I guess in theory I could drop the leg a smidge on the heavy with narrow wings so it would encourage drainage more?

I’ll have to have a look at the Metcalf ones, where does one get them?
 

Stoosh

Member
Location
sunny scotland
I think originally the designs dictated that the wing width was relevant to the leg spacing.

A 2.5m wide machine (2.4m technically?) has 4 legs at 600mm spacing and was designed to use 8 inch wings. A 3m machine has 6 legs at 500mm spacing and was designed to use 4 inch wings. I don't know what the leg spacing is on wider machines.

I have used a 2.5m speced as above for mainly subsoiling and got on well with it. I think a 3m speced as above with 8 inch wings would probably move to much. No experience though.

Personal preference applies also I'm sure.
 
Just looking at this as well at the moment, I have got a few of the low disturbance points to try, the wings seem to wear out so quickly and tungsten seem to be mega money and the bolts seem to wear out first.
 
the wing width required is all down to how deep you are working and leg spacing and how much disturbance you require. Different soils behave in different ways and need different solutions, you probably need to get a spade out.
 
Just looking at this as well at the moment, I have got a few of the low disturbance points to try, the wings seem to wear out so quickly and tungsten seem to be mega money and the bolts seem to wear out first.
If you are using tungsten wings you should use ferobide to protect the bolt holes and the back of the wing. tungsten with Ferobide can increase the lifetime of plain wings by up to 15 times
 

benny6910

Member
Arable Farmer
1A561DF9-1A0A-4229-8C25-5F22D5E198EA.jpg
I’ve changed my legs last year to these, Mdt low disturbance points and got Agriweld to make the leges for me. Very pleased with the results after trying original points and legs against the new ones.
 

benny6910

Member
Arable Farmer
How long do they last . Prefer a 2 piece

Roughly 40ha a set this year but there was 30ha on stone. I’ve got some hardened ones on aswell to compare and the look to be lasting well but sumo is parked up at the moment as the tractor is broken down so nothing is wearing out at the moment.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 81 42.2%
  • Up to 25%

    Votes: 68 35.4%
  • 25-50%

    Votes: 30 15.6%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 7 3.6%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,294
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top