T8050 GPS

Gone Shooting

Member
Location
hereford
Our T8050 - basically a blue Magnum is GPS ready ( i know little about it ! ) and has a rectangular plate on the cab roof with a clip each end and plug - what am i missing ? Big screen inside showing gps stuff in a past life - would it be Topcon or Trimble etc - thanks.
IMG_0679.JPG
 
Last edited:

del_boy

Member
Location
Herefordshire
Our new hollands have 2 plugs on the roof to take the nh/trimble gps dome so not sure on the 1 plug set up. You will aslo need the nav controller which is usually behind the passenger seat underneath the plastic tray.
 

SinisaB

Member
Location
Earth
You would need NAVII or NAVIII controler, 372 Receiver and intelli IV screen in order to run on RPRTX. Or you can take XCN1050 screen with NAV900 and NAVIII controler package. Second option is better for future upgrades.
 

Si85

Member
Location
North Notts
If you go down Trimble route my personal preference if it was mine, would be to go with Trimble nav2 or 3 and a Trimble screen like the 750, 1000 or 2050. Not the CNH intellview screen and ag 372 antenna, or the 1050 screen and 900nav.
 

Rejuvenating swards: Which option is best?

  • 347
  • 0


Written by Brian McDonnell

Maintaining grass quality during mid-season grazing is important. Farmers can maintain quality by entering ideal grazing covers of 1,300 – 1,500kg DM/ha, and grazing down to a residual of 4cm every rotation.

If you are now in a situation where cows are not cleaning out paddocks as well as they should be, leading to the development of steamy grass within the sward, here are some options.

Common options for rejuvenating swards include:

  1. Take a silage cut, probably into bales, remove the material and start again with the aftermath...
Top