Tanco 1514 square bale wrapper

[Mark C]

Anyone got one? use one ?

Output with large squares , mainly 80x 70's putting on 8 layers.

Cheers

Mark

 

[powerontheland]

Yep, I have one. 40/hr, but I am wrapping 80x47 bales. Good wrapper.

 

[powerontheland]

Make sure the chains on the rollers are f***ing tight or you will break chains. I run mine on the front linkage, so much easier. Can also be used on a telescopic too.

 

[powerontheland]

 

[JamesOHF]

Good wrapper. We wrap from 80x47 to 120x90 and rounds. Again 40 - 45 bales an hour, not the quickest but very versatile

 

[tealdog038]

Had a 1400 round bale wrapper, if you can get into the technician menu you can speed them up to your hearts content. Code was either 0000 or 1234 from memory.

 

[Grassman]

I run a tanco 1540 square wrapper which is the newer version.
Not a bad wrapper but not as quick as my old kverneland trailed wrapper.
I use it on the front linkage mainly.
Trouble is you lose time dropping off the bale then moving away to the next bale.
I bought mine so I could wrap with the telehandler as well.

 

[FarmerAngus]

What size rounds will 1540 wrap? Tanco website say 1.2m max but dealer claims they will wrap 1.35m? Whose right? cheers

 

[powerontheland]

They will wrap a 6ft round no problem, sure they will wrap a full Hesston 1.35 might be maximum bale LENGTH.

 

[D C]

Will they wrap 4 conventional bales stacked 2 on top of each other? Ive seen somewhere it says they will

 

[powerontheland]

Will they wrap 4 conventional bales stacked 2 on top of each other? Ive seen somewhere it says they will

Good luck with that one, I had a go the other day, waste of time.

 

[D C]

Thought that might be the case