The Demo Thread
- Thread starter Bald Rick
- Start date
ollie989898
Member
I can't, don't and won't ever understand the fascination for the yellow tractors.
Lovely, wont have struggled much with that though!
It knows it's behind it . 10k is about as much as it can do if it had duals you might get a bit more . I was only on it a wee while getting it set up then the boss took it and he wasn't flying up the hill anyway.
thoughts?
It's near enough a match for our re mapped 7930 I'd say .
Still not a fan of the R cab but goes well enough
Is it command pro?
Thankfully no . Premium spec standard autopower
Thought now possibly you use to the fast track you might want that everything on the joystick!
To be honest I only like the fastrac joystick because it's a t**t to drive without it as everything is too scattered around the armrest.
There's nowt wrong with standard autopower setup I can do everything without moving my hand . I'd like to see someone with a command pro do the same jobs as me any quicker
Also ours aren't 1 man machines so need to be jump on and go for everyone
Does the 5465 have the bigger rams on? I can’t remember the sizes off hand but ours originally had the smaller ones fitted, I want to say 65mm and you can swap them fit the bigger ones off say a 6480 etc, I’m pretty sure it was 10mm in diameter bigger but made it lift over a ton more. Ours was the older shape with top link sensing they may have fitted the bigger ones later as standard however
.
Speedstar
Member
- Location
- Scottish Borders
What do you think ?
Aye it's alright.
Goes well enough it's just a bigger version of the 155 we had but doesn't run as hot and actually pulls well .
It’s got another 100hp? Was it your 155 that was ridiculously thirsty even on tickover?
Sandy
Member
- Location
- Aberdeenshire
Its 300hp on a 4m drill it shouldn’t know it’s their
It knows it's there alright but so does our 300 +hp 7930
155 was chipped to 200 at the shaft and it only had a 3m on
Is that a 4m combi and a 3m front press?
Yeah it's a long story but basically we got a new 3m press to run with 3m combi but things changed and we ended up with a 4m 6 months later.
It's actually quite good you don't get the spill onto drilled ground from the paddles and the duals roll the bit that's left . A 3.5 to 3.8m would be ideal
Sandy
Member
- Location
- Aberdeenshire
Turn the outside paddles the other way round you won’t get the ridge effect