The Demo Thread

daveydiesel1

Member
Livestock Farmer
Location
Co antrim
Does the 5465 have the bigger rams on? I can’t remember the sizes off hand but ours originally had the smaller ones fitted, I want to say 65mm and you can swap them fit the bigger ones off say a 6480 etc, I’m pretty sure it was 10mm in diameter bigger but made it lift over a ton more. Ours was the older shape with top link sensing they may have fitted the bigger ones later as standard however 🤷🏻‍♂️.
Mine is the old shape. Dont know what rams is on it. If measurin the rams do i measure the piston or the tube?
 

barr11

Member
Mine is the old shape. Dont know what rams is on it. If measurin the rams do i measure the piston or the tube?
Measure the outer cylinder, the smaller ones visually look to have quite a bit of space round them when you lower the linkage, as in cylinder to back end casting where as the bigger ones are considerably tighter.

Just looked in manual and it adds an extra ton of lift so from 5 ton to 6 ton. Although ours does lift slower as it needs more oil to fill the cylinder, it’s definitely not the quickest hydraulics system on that model..
 
🤔
IMG_20211001_081807_3.jpg
IMG_20211001_081825_4.jpg
 

KB6930

Member
Location
Borders
Giving the but in the middle a whirl
It'll not happen often with me but credit where it's due it surprised both of us on fuel consumption.

Not totally accurate but it was using 20-25 litres per hour couldn't get a proper figure as it wasn't full when it came and they wanted it back at the same level. But definitely better than our 79 would be .

I took it back yesterday and it feels very high and has little turning circle compared to the American built tractors but all in all it was decent enough
 

Andrew

Member
Location
Huntingdon, UK
is it just the photo or is the massey cab really just a chicken coop?

:ROFLMAO: it's not very big no!

Used to have several of those in our fleet, 2 8480s a 70 and an 8450. Yours looks well cared for. How many hours

Just under 5000, 2007 build. Was brought as cheap hp for the baler, doesn't do much the rest of the year.
 

Top cereal and oilseed growers honoured at the Yield Enhancement Network Awards 2021

  • 276
  • 0
Despite an average growing year for most crops, many growers managed to go above and beyond their predicted max yields, with Lincolnshire grower Tim Lamyman taking the top spots for his wheat yields and his world record breaking winter barley yield.

The highest cereal and oilseed yields achieved at harvest 2021 were announced at this year’s Yield Enhancement Network (YEN) Awards on Wednesday 24th November at the Croptec Show. With award presentations by Tom Bradshaw, Vice President of NFU, 24 farms took home the evening’s top awards for highest yield and highest potential yield achieved for wheat, winter and spring barley, oats, and oilseed. The 2021 winners came from all corners of the UK, as well as from as far afield as Finland and New Zealand.

Familiar names from 2020 made the...
Top