As per title, thanks for the inspiration @bobk and @Will 1594!
And apparently its the done thing to tag serial hoarders @Dave W and @Nearly
I've put a few random pics on here, please PM for pictures if anything sounds remotely interesting!!
Collection from IP31 3BE preferred, I'd rather people inspect what they are buying to avoid any confusion. Delivery possible on smaller items.
-2x Invicta 3ph 250w vibratory motors, basically new and unused.
-2x Fenner torque arm gearboxes, came off Carier chain and flight conveyors, used.
-Pallet of Jacob clip together ducting fittings and some clips/seals. Mainly 175mm diameter with a few 250mm bits, unused from storage.
-Set of Manitou weld on handler brackets, new and unused
-Set of heavy duty Proforge pin and cone brackets, new and unused
-Carier 8" taper fit universal ducting bend, used but would clean up ok.
-Carier 8" no7 flanged valve, used, could do with cleaning and repainting
-Carier 9" no7 flanged valve, used, spray galv finish, needs operating handle fitting.
-Carier slide on conveyor outlet. 45 deg valved twin outlet, 8" taper fit, lightly used, still has delivery label on!
-NJ Froment 50KVA PTO AC generator, circa 25 years old, not been used for about 20 years, spares or repair, sold as seen.
-5' wide ditching bucket, possibly Ford/Massey vintage, old and used but solid. 315mm centres, 50mm pins, 225mm between ears.
-7' wide toe tip beet bucket, basis for a project would be the best use for this.
-Pallet of stainless steel offcuts. Box, tube, flat and angle.
-3m and 1.3m lengths of 127mm x 1.5mm 304 stainless steel tube, new and unused, just a bit dusty/scratched from storage
-Adcock and Shipley bank of 4x pillar drills, all MT3 fitting, one of them reversible for threading. Old but believed to be in working order when removed 3 years ago. Base has been damaged in the past and repaired. Viewing essential on this one.
-Farm built H frame hydraulic press. Heavy duty. Height adjustable bed. No ram or hydraulics, just the frame. Ideal for a project.
-Selection of galv handrail clamps 48.3mm and 42.4mm tube sizes. Various brands, Kee Klamp, Interclamp etc. Mostly unused.
-Makita 6904VH 110v impact wrench. 1/2" drive. Working order. Cordless has taken over!!
-Makita 6802BV 110v screw gun, working order but flex could do with replacing as has gone brittle and split. Again, cordless has taken over!!
-1x 3m and 1x 1.7m length of new 6" auger flighting. Flight only, no centre tube. Would suit 60mm centre tube. I'm 99% sure its right handed!!
-Approx 100 block paving bricks, 8" x 4" x 2" thick, used but tidy enough
-28x pieces, 130mm x 100mm x 10mm mild steel plate
-Approx 60m of 6mm cable/wire rope in six coils of various lengths
-5x hydraulic rams, approx 6' long, condition unknown, sold as spares or repair.
And apparently its the done thing to tag serial hoarders @Dave W and @Nearly
I've put a few random pics on here, please PM for pictures if anything sounds remotely interesting!!
Collection from IP31 3BE preferred, I'd rather people inspect what they are buying to avoid any confusion. Delivery possible on smaller items.
-2x Invicta 3ph 250w vibratory motors, basically new and unused.
-2x Fenner torque arm gearboxes, came off Carier chain and flight conveyors, used.
-Pallet of Jacob clip together ducting fittings and some clips/seals. Mainly 175mm diameter with a few 250mm bits, unused from storage.
-Set of Manitou weld on handler brackets, new and unused
-Set of heavy duty Proforge pin and cone brackets, new and unused
-Carier 8" taper fit universal ducting bend, used but would clean up ok.
-Carier 8" no7 flanged valve, used, could do with cleaning and repainting
-Carier 9" no7 flanged valve, used, spray galv finish, needs operating handle fitting.
-Carier slide on conveyor outlet. 45 deg valved twin outlet, 8" taper fit, lightly used, still has delivery label on!
-NJ Froment 50KVA PTO AC generator, circa 25 years old, not been used for about 20 years, spares or repair, sold as seen.
-5' wide ditching bucket, possibly Ford/Massey vintage, old and used but solid. 315mm centres, 50mm pins, 225mm between ears.
-7' wide toe tip beet bucket, basis for a project would be the best use for this.
-Pallet of stainless steel offcuts. Box, tube, flat and angle.
-3m and 1.3m lengths of 127mm x 1.5mm 304 stainless steel tube, new and unused, just a bit dusty/scratched from storage
-Adcock and Shipley bank of 4x pillar drills, all MT3 fitting, one of them reversible for threading. Old but believed to be in working order when removed 3 years ago. Base has been damaged in the past and repaired. Viewing essential on this one.
-Farm built H frame hydraulic press. Heavy duty. Height adjustable bed. No ram or hydraulics, just the frame. Ideal for a project.
-Selection of galv handrail clamps 48.3mm and 42.4mm tube sizes. Various brands, Kee Klamp, Interclamp etc. Mostly unused.
-Makita 6904VH 110v impact wrench. 1/2" drive. Working order. Cordless has taken over!!
-Makita 6802BV 110v screw gun, working order but flex could do with replacing as has gone brittle and split. Again, cordless has taken over!!
-1x 3m and 1x 1.7m length of new 6" auger flighting. Flight only, no centre tube. Would suit 60mm centre tube. I'm 99% sure its right handed!!
-Approx 100 block paving bricks, 8" x 4" x 2" thick, used but tidy enough
-28x pieces, 130mm x 100mm x 10mm mild steel plate
-Approx 60m of 6mm cable/wire rope in six coils of various lengths
-5x hydraulic rams, approx 6' long, condition unknown, sold as spares or repair.
