- Location
- North West
Any landing you can walk away from is a good landingNo words needed
View attachment 897056
Any landing you can walk away from is a good landingNo words needed
View attachment 897056
Ouch.
What is that, out of interest??
That is a Cambridgeshire Oil Well head, you can see a bit leaking out.
Disused irrigation inletOuch.
What is that, out of interest??
Old lime spreader has a very slow puncture so thought I’d take it to workshop for a bit of fresh air after 2 years.
Valve was there when I set off. Guessing it’s a new tube needed now as I can’t find it View attachment 899525
Our Massey did that earlier this summer mowing. At the time we had 2 tractors and Telehandler all needing fixing! Luckily we managed to get this welded back up for a temporary repair!
Weld it up?
Weld it up?
And BIG billNo, thread the brocken part out of the fork and thread the other part in, drill hole and knock pin in then re assemble, you won’t get so much range in drop arm but will do to carry on till new part comes
Think i would try and knock off tyre with wheel on spreader
Them nuts look like the studs would snap if you tryed to undo them lol
I bought a torque multiplier for jobs like that only 40 ish quid on ebay with a set of sockets tooThey fell off literally on the last half. They were tight all the way until then
View attachment 899662