1. Farmers, growers, processors and industry representatives are being asked for their views from 31 August for 10 weeks on the role of the Agriculture and Horticulture Development Board (AHDB).

    The AHDB is a UK statutory levy board, funded by farmers, growers and others in the supply chain. As we leave the EU, there is an opportunity to ensure that the sectors that the AHDB covers are as competitive as possible. This review will look at the AHDB’s purpose and priorities, its strengths and where improvements need to be made.

    This is a joint 10-week exercise covering England, Scotland, Wales and Northern Ireland. The request for views will close on 9 November.

    click here to have your say...

    or

    go straight to Defra to fill out the survey here....
    Dismiss Notice

thresher belt joiner

Discussion in 'Classic Machinery' started by David the spud man, Aug 7, 2018.

  1. Hi does anyone know wheres the best place to buy a thresher belt joiner thanks
     
  2. X344chap

    X344chap Member

    Location:
    Central Scotland
    Alligator clips?
    Try Ebay, Theconveyorshop.co.uk etc. just google flat belt joining or drive belt joining.
     
    Kevtherev and David the spud man like this.
  3. tomlad

    tomlad Member

    Location:
    nr. preston
    In the past found ac belting good firm
     
    David the spud man likes this.
  4. grainboy

    grainboy Member

    Location:
    Bedfordshire
    Is this what you are looking for?
    Available and would post if you are interested,
    Also have a tool for joining, but can’t work out how to use it,
     

    Attached Files:

    David the spud man likes this.
  5. dont know where you are but tony at beltec market rasen can deff help
     
    David the spud man likes this.
  6. thanks for replies Im not even sure what im looking for myself its about 3" wide thresher drive belt coming from tractor pulley there no joiner left on the orignal belt
     
  7. tomlad

    tomlad Member

    Location:
    nr. preston
    Might be a endless belt
     
    David the spud man likes this.
  8. Oldstyle

    Oldstyle Member

    Probably an endless belt.
     
    David the spud man likes this.
  9. tomlad

    tomlad Member

    Location:
    nr. preston
    Id used a jointed on my fergie saw bench .
    Got bits from bearing shop.
    It gave trouble. Got endless new from a c belting, they new exactly what it was for. Sorted.
     
    David the spud man likes this.
  10. Got it sorted thanks for all the help
     
    tomlad likes this.
  11. TheTallGuy

    TheTallGuy Member

    Location:
    Cambridgeshire

Share This Page