- Location
- Glen Clova, Angus, DD8 4RD
Beautiful morning...
... For carting shite
... For carting shite
Today at work
- Thread starter Penmoel
- Start date
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
Bloody hell Bob you aren't suppose to notice. On Saturday I went and drilled the holes in the existing building ready to bolt to.
I put the template upside down on that pillar so the holes where upside down
in my defence it was peeing down and it was the last one I did
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
Here's the evidence
You can just see the spare hole abive the eaves tie
You can just see the spare hole abive the eaves tie
- Location
- norfolk
Lovely morning, even in the fens!!
sherg
Member
- Location
- shropshire
Is it a jfProud dad moment,get in for breakfast after milking and the boy is flat out on silage
View attachment 489194
He lost the shoot and pick up reel somewhere between living room and kitchen,but got to give him 10 out of 10 for determination
John Deere painted orangeIs it a jf
Greenbeast
Member
- Location
- East Sussex
Before the day job starts...
Got him to split the load roughly 50/50, which, looking at the two piles, worked out spot on.
Got him to split the load roughly 50/50, which, looking at the two piles, worked out spot on.
- Location
- Glen Clova, Angus, DD8 4RD
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
Before the day job starts...
Got him to split the load roughly 50/50, which, looking at the two piles, worked out spot on.
What did you order in the end?
Greenbeast
Member
- Location
- East Sussex
recycled type 1, hope it's suitable.
Will get it spread and compacted this weekend and think about getting a slab on it soon after
Will get it spread and compacted this weekend and think about getting a slab on it soon after
RWG Contracts
Member
- Location
- Samlesbury, Lancashire
- Location
- Owaka, New Zealand
Was a little bit rushed/muddy to get any happy snaps today
Was down at the farmstore at opening to get a roll of alkathene and some fittings.. Had water to the stock by 1pm, ended up digging up an area roughly the size of my tractor to find the joiner into the 20mm system from the 15mm. Got lucky that both the immediate troughs were teed off after the point I connected into.
Had enough time to weld up my gate and hang it, before taking the boys for a haircut. Little man was not happy about the idea, so I had my first sit in a hair salon chair in over 30 years.. came home covered in hair, checked stock, cooked dinner and bathed boys..
My neighbour brought beer so we did another hour on his dogbox
Will try harder tomorrow.
Was down at the farmstore at opening to get a roll of alkathene and some fittings.. Had water to the stock by 1pm, ended up digging up an area roughly the size of my tractor to find the joiner into the 20mm system from the 15mm. Got lucky that both the immediate troughs were teed off after the point I connected into.
Had enough time to weld up my gate and hang it, before taking the boys for a haircut. Little man was not happy about the idea, so I had my first sit in a hair salon chair in over 30 years.. came home covered in hair, checked stock, cooked dinner and bathed boys..
My neighbour brought beer so we did another hour on his dogbox
Will try harder tomorrow.
- Location
- Lancashire
Greenbeast
Member
- Location
- East Sussex
mechanic inbound to look at tractor, thought i'd set up for him
Philip Watkins
Member
- Location
- Back in Shropshire
Looking at the first pic I thought it had been snowing in Sussex, then I scrolled downBefore the day job starts...
Got him to split the load roughly 50/50, which, looking at the two piles, worked out spot on.
- Location
- Glen Clova, Angus, DD8 4RD
"Classics earning their keep" here "today at work" again
On Saturday I went and drilled the holes in the existing building ready to bolt to.
I put the template upside down on that pillar so the holes where upside down
Don't worry we've had much worse problems before !!!
