Today at work
- Thread starter Penmoel
- Start date
- Location
- North West
Busy as usual today, re-built the power quad back together and got sat in.
New housing looks better.
Then had a 7530 in for a new front pulley.
Then went bailing some more grass.
Fairly productive day really [emoji51].
New housing looks better.
Then had a 7530 in for a new front pulley.
Then went bailing some more grass.
Fairly productive day really [emoji51].
Landyman
New Member
Now most of the gear is in the van there is no room to kip
Landyman
New Member
Oh by the way @Kevtherev i passed my spraying tickets
100% who's a clever old fecker then
That'll be me
100% who's a clever old fecker then
That'll be me
All good on first day ?
Landyman
New Member
All the electrics are there
and the first aid kit ,eye wash etc
Landyman
New Member
It would be if the grass didnt grow so fast
Shovelhands
Member
- Location
- Sunny Essex
It would be if the grass didnt grow so fast
Can you not spray some roundup as you leave,will save a bit time next time.
Landyman
New Member
Started the day spraying the Peas off.
Then attempted to start combining
Was to wet at 1pm so put the lifters in as I was missing the flat bits
had 1 bit of luck, forgot to put the 2 bolts back in that hold this flap, thankfully the auger spat it out the front and didn't wind it into the drum
Then the fan belts broke, at least I always have a pair spare, still didn't spot it soon enough, and it overheated
Then the slip clutch decided to give up on the trunk
Wheel off and soon got that sorted
Then discovered why the reverser has stopped reversing
Not the greatest afternoon/evenings work considering I didn't even manage a tank full of Barley
Last edited:
Landyman
New Member
N
except for the gravel tracks
Not allowed to unfortunately, im only allowed to kill a 1.5 meter margin on the outside of the compounds the insides have to be kept greenCan you not spray some roundup as you leave,will save a bit time next time.
except for the gravel tracks
The turner made it round the field a few times without shaking its self apart after it's rebuild
didn't need 4wd today, and the turner never fell down the slope like the mower did just in front of me
and then I had a boring evening with Victoria..
So all in all a grand day!
REStracTORATION
Member
Short straw day for me
People who think the welders cure everything
So out with the drill
Flog this in
Job done
Always pleaseing to get broken studs out
Thats all ive got picture's of boreing i know
Pavt Wheels mudgaurds bonnet for 178 got blasted yesterday so tbings will start and move again on that plus loads of other things arriveing needing doing
Oh and good weather has me steering wheel attending again but you all dont want to see more tractor picture's... do you
People who think the welders cure everything
So out with the drill
Flog this in
Job done
Always pleaseing to get broken studs out
Thats all ive got picture's of boreing i know
Pavt Wheels mudgaurds bonnet for 178 got blasted yesterday so tbings will start and move again on that plus loads of other things arriveing needing doing
Oh and good weather has me steering wheel attending again but you all dont want to see more tractor picture's... do you
Landyman
New Member
It is if ive got to get from grangemouth to Ellesmere port before it grows 3 inchThat's not a bad thing though is it
Shovelhands
Member
- Location
- Sunny Essex
It is if ive got to get from grangemouth to Ellesmere port before it grows 3 inch
Drive faster.......
- Location
- midlands lreland
I feel your pain. I worked with a dominator 108 for a few years and when their good their very good to thrash but when their bad their very bad.
- Location
- midlands lreland
Another attempt at a picture.
