Today at work

[mtx.jag]

Been like a bag of assorted deere's today, started out with a 7530 with a puh problem. After a few checks found the threads on the lift rods are shot!
View attachment 555778
Top pins really didn't want to come out so it turned into a big job as usual.
View attachment 555780
Will be easier going back in. [emoji106]
View attachment 555782

Then a 6330 which keeps blowing fuses, loom rubbed in the usual place. View attachment 555784
View attachment 555786

Then onto a 6430 auto power that kept stopping, that just needed the brake switch adjusting.

Then a set of fans in a 6930 with blocked drain pipes.
View attachment 555788

Then a 6920 on the way home which my customer had took the reverser leave to bits and couldn't get it back together[emoji23].

If you lived near us I would have no fear of running Deeres

 

[REStracTORATION]

This arrived today

View attachment 555802 View attachment 555804

Then all set for tomorrow
View attachment 555800

New tyres aswell

 

[REStracTORATION]

If you lived near us I would have no fear of running Deeres

Time served, alot of experience
He will save somebody a fortune

 

[multi power]

had the afternoon off so servicing fourtrak, new anti roll bar bushes on back (I only got them 6 months ago)
Only snag is I can't get the oil filter off, and I can't find my filter strap

 

[Fraserb]

New tyres aswell

Well spotted, just on the back today, fronts next week, needed the backs straight away

 

[REStracTORATION]

View attachment 555818 View attachment 555820had the afternoon off so servicing fourtrak, new anti roll bar bushes on back (I only got them 6 months ago)
Only snag is I can't get the oil filter off, and I can't find my filter strap

Screw driver through it

 

[multi power]

Screw driver through it

Tried that !
Never failed to get a filter off before

 

[REStracTORATION]

Tried that !
Never failed to get a filter off before

String around it then twist to tension it up then use the screw driver as a lever on the filter to undo
Like a homemade filter strap

 

[RWG Contracts]

Went on a visit to see @DanielLGQ who supplies my panels

9" panel anyone

 

[multi power]

String around it then twist to tension it up then use the screw driver as a lever on the filter to undo
Like a homemade filter strap

You think string will do it ? I was getting rather fudged off with it so I just gave up, it will probably come off in a couple of minutes when I'm more relaxed

 

[Pan mixer]

Nothing as fancy as the above but...

Drizzle again today, no harvest or haymaking, what are we going to do?

I know.

 

[RWG Contracts]

Laid concrete at various jobs as well, just for a change

 

[Pan mixer]

You think string will do it ? I was getting rather fudged off with it so I just gave up, it will probably come off in a couple of minutes when I'm more relaxed

It nearly always does it, and the added bonus, if it breaks, there is usually plenty more about for another go.

 

[Pan mixer]

Laid concrete at various jobs as well, just for a change

View attachment 555842

View attachment 555844

We haven't done any since before calving in April though. Nice to see you posting again.

 

[Rimjob]

As in sits there spinning

Yep ... Makes all the noise but spins like a twunt with no results...
But once or twice it grips hold an gets balls deep
Sounds well though

 

[ThatsSomeSheep]

Some befores and after
View attachment 555462 View attachment 555464

Looks great, well done.

TSS

 

[ThatsSomeSheep]

Right peeps. Tonights question is
Where am i staying

View attachment 555680
Im going out for some tea shortly and a few beers , spent all day soaked to the skin so i think ive earned it . Catch you later

Moffat

TSS

 

[REStracTORATION]

You think string will do it ? I was getting rather fudged off with it so I just gave up, it will probably come off in a couple of minutes when I'm more relaxed

Worked in past for me
Or big grips

Or get the welder out and weld some pipe to the fecker

 

[Kiwi Pete]

Made the most of a dry spell and went baling some hay and silage , didn't get a photo as I was under pressure !! Then this happened !!! View attachment 555674View attachment 555676
Drive shaft on end of roller sheared off in the bearing , threw chains off , broke a chain which in turn ripped holes in a couple of pipes and some cables [emoji35]
Quick phone call to mchale dealer and a road trip to Welsh Wales to swap mine for a loan machine to keep me going [emoji106]
Bit of a nail but beggars can't be choosers [emoji16]
All meant a late finish View attachment 555682 and a steady day trimming river banks today [emoji41]
Just had a call to say that mchale will cover the rolleras well which makes things a bit less painful [emoji389][emoji389]

That broken shaft brings back terrible memories
What's the bale count on your machine?

 

[Kiwi Pete]

Screw driver through it

or a vee belt and big ring spanner
@smcapstick will have a spare