Today at work

[KennyO]

My upset with the throw away world has reached new heights.
@Kathy the lamb has been moaning her washing machine has been getting noisy. Today I found a moment to have a look at it, some fair slop in the main bearing..View attachment 833512
“No problem, I'll soon attack this"

Oh wait, how do you seperate the outer to get the drum out, there's usually a ring of bolts or some clips View attachment 833513
Oh they've made it so you can't repair it, so instead of a 5quid bearing/seal you now have to buy a complete unit for £130.
Looks like a major new purchase is on the cards

Is it a hotpoint by any chance?

 

[Muddyroads]

Does this count as a near miss?

 

[Adeptandy]

Gave the OSR a bit of DAP today

Stick nav working again

Then decided to destroy the erm Barley cover crop ? it’s done a good job hiding the OSR

First load of Wheat away, great start, asked to load feed wheat, but it turns out they meant the biscuit wheat, so first load rejected, inquest in the morning [emoji17]

 

[REStracTORATION]

Moisture preservation exercise View attachment 833394View attachment 833395View attachment 833396

And some fell on Stoney ground!
View attachment 833397

I recognise that house
Was it on grand designs?

 

[Two Tone]

I recognise that house
Was it on grand designs?

Yes. It’s (now) called Under Hill House.
I think it was series 10, episode 2

 

[Speedstar]

Drilling winter barley the last few days

 

[v8willy]

Moisture preservation exercise View attachment 833394View attachment 833395View attachment 833396

And some fell on Stoney ground!
View attachment 833397

That's the sort of place you could sit outside in the nip & nobody would see you...



















...till some bugger in an 8340 roared past

 

[Tomtrac]

They wouldnt let me put it in there dumper so i had to carry it to the on site tip
Just nicely balances
I had to think twice as to spinning round from the dig behind me to facing forwards as there was a building on one side and a 3 mt drop the other but surprisingly it didnt tip when bucket on the side off machine but at front or

rear tracks off the floor

 

[Hfd Cattle]

Knocked this off this morning 4th cut
Will bale up tomorrow then re-seed

 

[New Puritan]

My upset with the throw away world has reached new heights.
@Kathy the lamb has been moaning her washing machine has been getting noisy. Today I found a moment to have a look at it, some fair slop in the main bearing..View attachment 833512
“No problem, I'll soon attack this"

Oh wait, how do you seperate the outer to get the drum out, there's usually a ring of bolts or some clips View attachment 833513
Oh they've made it so you can't repair it, so instead of a 5quid bearing/seal you now have to buy a complete unit for £130.
Looks like a major new purchase is on the cards

If you end up buying a new one, you could use the drum from the old one as a fire pit. You can also use the glass door as a mixing bowl as they're heat proof. Our 20yr old washer died this summer but lives on as the above 2 things!

 

[Lincs Lass]

They wouldnt let me put it in there dumper so i had to carry it to the on site tip
Just nicely balances
I had to think twice as to spinning round from the dig behind me to facing forwards as there was a building on one side and a 3 mt drop the other but surprisingly it didnt tip when bucket on the side off machine but at front or View attachment 833605View attachment 833606View attachment 833607rear tracks off the floor

Thats one way to check the idler rollers ,both sides at the same time

 

[Hesstondriver]

If you end up buying a new one, you could use the drum from the old one as a fire pit. You can also use the glass door as a mixing bowl as they're heat proof. Our 20yr old washer died this summer but lives on as the above 2 things!

there are load of springs, clips,pipes and seals all worth salvaging. the tin case can also be used to patch wheel barrows - allegedly

 

[Blue.]

What setting do you use for washing the kids?

Boil wash if they’ve been naughty! ?

 

[Peter]

Builder finally finished with new shop. Now we get to build shelving and stair railing.

 

[puppet]

If you end up buying a new one, you could use the drum from the old one as a fire pit. You can also use the glass door as a mixing bowl as they're heat proof. Our 20yr old washer died this summer but lives on as the above 2 things!

Neighbour is an electrician so salvaged these from his skip. Proper recycling

 

[Nearly]

Plough previous owner fitted the wrong shear bolts so this needed a repair.

This should be a parallel slot.

spot the difference. (where's the head against brick wall smiley? )

Sorted

Just the nut on the steering wheel to educate now.

 

[Hillside]

Whins getting the flail treatment.

 

[bumkin]

They wouldnt let me put it in there dumper so i had to carry it to the on site tip
Just nicely balances
I had to think twice as to spinning round from the dig behind me to facing forwards as there was a building on one side and a 3 mt drop the other but surprisingly it didnt tip when bucket on the side off machine but at front or View attachment 833605View attachment 833606View attachment 833607rear tracks off the floor

nice pebble , garden feature? we had one some one rooted up subsoiling for spuds when we picked it up with the 530/70 it lifted the back wheels off the floor

 

[New Puritan]

there are load of springs, clips,pipes and seals all worth salvaging. the tin case can also be used to patch wheel barrows - allegedly

Ha! Mine yielded a load of 10mm bolts some of which have found their way onto the straw chopper already. And the lumps of concrete went into the base of a new path.

 

[Little squeak]

"Plough previous owner fitted the wrong shear bolts so this needed a repair. "
The bolts are usually colour coded at least they haven't used ordinary bolts what colour was on the one you put back?