Today at work

Adeptandy

Member
Arable Farmer
Location
PE15
A few from the weekend :)

IMG_4431.JPG


Got the bays blocked for the welping areas :D

IMG_4432.JPG


Mrs adeptandy got the mist coat on the ceiling & walls just after I got the down lights in (y)

IMG_4433.JPG


Then started on wiring in the Fuse Panel, been a while, so had to dig deep in the grey matter :rolleyes:

Pups due Friday, so a bit to do still and a busy week on boilers ahead as well :nailbiting:
 
Last edited:

Phil P

Member
Arable Farmer
Location
North West
Monday morning parts run first job, I do sometimes wonder if I should be using a securicor van rather than a pickup for these runs:cautious::ROFLMAO:
CD7E8908-35C9-4133-93E5-0D5B03D043FA.jpeg


Then as promised, cracked on with the 6420 brakes.
A06E2203-A906-494C-BE78-2CA9A5A4BF77.jpeg


Just about ready for a set.
6396CEB4-A567-48A4-9C21-536EB9088DD3.jpeg


Small bits just starting to break off.
41C28466-408F-458B-8944-30DCF60CA953.jpeg


Dam wheel didn’t want to come off the other side:mad:, had to resort to brute force :sneaky:
255C8CDB-99C1-4937-A1D4-7D338164B6FD.jpeg


Axle wasn’t much better but came off eventually.
802FAC87-81E7-4F1B-8A14-17237411F105.jpeg


Still some servicing and a few other bits to finish in the morning, hopefully the 66 head should be back by then(y)
 

Sharpy

Member
Livestock Farmer
Monday morning parts run first job, I do sometimes wonder if I should be using a securicor van rather than a pickup for these runs:cautious::ROFLMAO:
View attachment 766048

Then as promised, cracked on with the 6420 brakes.
View attachment 766050

Just about ready for a set.
View attachment 766052

Small bits just starting to break off.
View attachment 766054

Dam wheel didn’t want to come off the other side:mad:, had to resort to brute force :sneaky:
View attachment 766058

Axle wasn’t much better but came off eventually.
View attachment 766060

Still some servicing and a few other bits to finish in the morning, hopefully the 66 head should be back by then(y)
What do you do/use to pull the half axles from the diff housing?
 

Agriimark

Member
Arable Farmer
Location
Worcestershire
Monday morning parts run first job, I do sometimes wonder if I should be using a securicor van rather than a pickup for these runs:cautious:[emoji23]
View attachment 766048

Then as promised, cracked on with the 6420 brakes.
View attachment 766050

Just about ready for a set.
View attachment 766052

Small bits just starting to break off.
View attachment 766054

Dam wheel didn’t want to come off the other side:mad:, had to resort to brute force :sneaky:
View attachment 766058

Axle wasn’t much better but came off eventually.
View attachment 766060

Still some servicing and a few other bits to finish in the morning, hopefully the 66 head should be back by then(y)
Was only just thinking i wonder if phil has done a parts run today [emoji57] was getting worried i was not going to get my daily fix of "jd fixers" [emoji23]
 

Phil P

Member
Arable Farmer
Location
North West
Was only just thinking i wonder if phil has done a parts run today [emoji57] was getting worried i was not going to get my daily fix of "jd fixers" [emoji23]
Got some more bits to pick up tomorrow:facepalm:but will probably send the old man as it’s just a couple of things for one job so nothing technical:rolleyes:
 

Phil P

Member
Arable Farmer
Location
North West
I cant wait for the 7930 to be ripped apart. . Need a lorry for that parts run [emoji23]
I’m hoping it’s not that serious, it’s supposedly had two new pistons and liners fitted by the customer and some injectors which the dealer programed. It’s running like a bag of spanner’s though so only time will tell!
 

Agriimark

Member
Arable Farmer
Location
Worcestershire
I’m hoping it’s not that serious, it’s supposedly had two new pistons and liners fitted by the customer and some injectors which the dealer programed. It’s running like a bag of spanner’s though so only time will tell!
Maybe a spanner was left in there [emoji85] if I was closer i would come and help while I am quiet on work
 

grainboy

Member
Location
Bedfordshire
Having a smashing time today,
 

Attachments

  • 514657B5-7789-4C48-B136-CB5138556BDB.jpeg
    514657B5-7789-4C48-B136-CB5138556BDB.jpeg
    521.6 KB · Views: 450
  • 0C374849-3F64-4733-8B4A-B3945B175A90.jpeg
    0C374849-3F64-4733-8B4A-B3945B175A90.jpeg
    556.9 KB · Views: 445
  • BACC2D58-334E-4F97-A4E2-8034D4A045FD.jpeg
    BACC2D58-334E-4F97-A4E2-8034D4A045FD.jpeg
    516.4 KB · Views: 439
  • F572CF8F-5BF4-465B-89E6-DC8888BABDA0.jpeg
    F572CF8F-5BF4-465B-89E6-DC8888BABDA0.jpeg
    467.5 KB · Views: 426
  • 0ACC46EB-3127-4F1D-B400-8E6E5A64BF72.jpeg
    0ACC46EB-3127-4F1D-B400-8E6E5A64BF72.jpeg
    561.4 KB · Views: 379

SFI - What % were you taking out of production?

  • 0 %

    Votes: 78 42.9%
  • Up to 25%

    Votes: 63 34.6%
  • 25-50%

    Votes: 30 16.5%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 5 2.7%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,286
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top