Today at work

[grainboy]

Getting on with shed dismantle, available if anyone interested, and morning sky on the way to site,

 

[Warp Land Farmer]

Getting on with shed dismantle, available if anyone interested, and morning sky on the way to site,

@Dave W is clearing some land for a new showroom perhaps he may bid you on the shed

 

[Nearly]

@Dave W is clearing some land for a new showroom perhaps he may bid you on the shed

If the legs on one side are 3m longer than the others it will just go straight up as it is!

 

[grainboy]

Make a good machine store

 

[aled1590]

Moved the big bull out from his girlfriends.

View attachment 844819

unloaded some steel for a few projects.

View attachment 844822

Annoyed a whole lot of twitchers who were all standing looking over the gate at some cattle egrets.

View attachment 844828

As the cows all assumed that I had come to feed them and they stood in the way of the long lenses.

View attachment 844829

(cattle egrets in the background, 'starving to death' cows in the foreground)

What width is your cow shed and width of scrape passage? Looks a nice airy shed!

 

[Warp Land Farmer]

If the legs on one side are 3m longer than the others it will just go straight up as it is!

Ah so you’ve seen the level of the breeze blocks then....

 

[Robert K]

Another wet day so started cleaning up the wash bay and JCB had a small milestone

 

[HappyShep76]

A few pics from the week so far. At least it’s stopped raining.....

 

[Pan mixer]

What width is your cow shed and width of scrape passage? Looks a nice airy shed!

It is 14 feet, should have been 12 but the shed builders put the ends in a bit wrong.

 

[AJR75]

With it being so wet it's a job to get on with much farming stuff per-se (and I'm not full time at it either) so into the workshop I went helping a friend out making gates for his new shed (no pictures unfortunately) then decided it was either into the scrap bin or make something of it for this old roller frame....



Seemed too good to scrap so took the plunge and had some plates rolled to make up new drums...



Cut the prep on with the plasma then built up the drum and got to welding...



Yes before anyone mentions it, I had the 4 ends profiled the same which included the holes for the bungs (#idiot!) so had to weld them closed.



Finished job. Just waiting for spring time now to try it out or sell it.

 

[Nearly]

Did some welding on 8'x4' cow feeder but realised I'd got the plans upside down.

 

[AJR75]

Did some welding on 8'x4' cow feeder but realised I'd got the plans upside down.
View attachment 844970

It's ok, it's an Australian one

 

[Nearly]

It's ok, it's an Australian one

I could make into a small creep feeder?

 

[mixed breed]

This week's bodge (As there's nowt else doing)

drill some holes

Concrete in some box iron (or sockets if your posh)

Glue some metal together (mostly found in scrap pile)

And insert some boards. (crickey timbers gone dear)

One removable feed trough and No more forking

 

[br jones]

A few pics from the week so far. At least it’s stopped raining.....
View attachment 844861View attachment 844862View attachment 844863View attachment 844864View attachment 844865View attachment 844866View attachment 844867View attachment 844868

Your dog is a beauty

 

[HappyShep76]

Your dog is a beauty

Thank you ?

 

[TrewithickFarm]

Bust few days at lifeboat station doing 4 yearly maintenance on launch and recovery equipment.

 

[Bury the Trash]

Did some welding on 8'x4' cow feeder but realised I'd got the plans upside down.
View attachment 844970

Bugger

 

[REStracTORATION]

Covering the ground today trying to get some softer bits in before the next band of rain View attachment 839982

Aha no dust there...
(Miles behind in here having a catch up now)

 

[Nearly]

Bugger

Tried again.

Sod that I'll get the fan going instead.