Chae1
Member
- Location
- Aberdeenshire
Today at work
- Thread starter Penmoel
- Start date
The usual suspects were pumping slurry..and then put stuff on Facebook about how NVZ is going to damage the industryI was gonna say, the manitou didn’t make a mark yesterday, 6” deep trenches across grass fields todayis that since 6pm last night?
- Location
- West Wales
Initials?The usual suspects were pumping slurry..and then put stuff on Facebook about how NVZ is going to damage the industry
Another 7mm this morning.I do 6pm to 6pm, the 20mm we had between 8am-6pm yesterday puts mine in a different day
- Location
- West Wales
That’s yesterday daytime’s rain then as I had that yesterday day but it was dry all night here, I was out at 20:30 and 01:30 and no rain here. What a beautiful day today!
serf
Member
- Location
- warwickshire
That IBC pump looks the biz
- Location
- Ballyclare Northern Ireland
What did you take the manifold off with? A sledge?
We missed that completely! Back pumping tomorrow if the sun stays out!
That was in the previous 24hrs.
- Location
- West Wales
davidroberts30
Member
- Location
- pembrokeshire
No where better when the sun is shining
Nice bunch Al, you've done them well.
sticky
Member
- Location
- Near Stratford upon Avon
Did a bit for a friend today will go back tomorrow and do a bit more.
Lol. No rattle gun. Apparently snapping manifold bolts is common on this engine, as is manifold gaskets blowing...
Had to go shopping for cobalt drill bits and helicoils.
Then take bonnet frame apart to get drill access to rear bolts. So couple hour job turned into a all day job. Ready to put back together tomorrow now
storming
Member
- Location
- Black Isle
We have all been there.
Chae1
Member
- Location
- Aberdeenshire
Other day ploughing.
grainboy
Member
- Location
- Bedfordshire
Drier down ready for transportation, back to bins.
Brickbats from Stewartby as infill ? Used to see George Webbs transporting huge numbers away from London Brick, never see any now