- Location
- southern riverina Australia
Whipped old purlin truss out and posts down and reset them on new footings
Then put new post up and re attached wall purlins.
Got trusses bolted together then it was milking time
Fingers crossed it was all still standing in the morning.....
And yes. was still there
So leveled posts and then set trusses
Just enough height in tubby....Bolted the wall end up first . Had other post loose for clearance, then bolted it in. All went spot on. Highly unusual.......
Id call that dead straight
Then put new post up and re attached wall purlins.
Got trusses bolted together then it was milking time
Fingers crossed it was all still standing in the morning.....
And yes. was still there
So leveled posts and then set trusses
Just enough height in tubby....Bolted the wall end up first . Had other post loose for clearance, then bolted it in. All went spot on. Highly unusual.......
Last edited: