- Location
- Lincs / Cambs border
Barley and wheat yields have been very good here . We haven’t had a wheat bushel weight below 80 and have cut everything below 15% moisture. So v happy here .
Today at work
- Thread starter Penmoel
- Start date
- Location
- Moreton-in-Marsh, Glos
Helping a near neighbour today, who’s combine has broken down.
When I saw the hills he is using it on, I’m not surprised. But they never show up as anything like as steep on a photo.
When I saw the hills he is using it on, I’m not surprised. But they never show up as anything like as steep on a photo.
- Location
- hereford
Thats a flat field here !!!!!
Steevo
Member
- Location
- Gloucestershire
What slope does the combine inclinometer say?
Steevo
Member
- Location
- Gloucestershire
Looks like you’ve got a few random stripy bits like me. Can’t put any logic to them as it wasn’t even drilled in that direction.
- Location
- Huntingdon
This is behind a 40’ claas
Even the old krone spat its dummy out . Was fed watching bales come out the baler on the camera perfect, then explode and then re bale them
Even the old krone spat its dummy out . Was fed watching bales come out the baler on the camera perfect, then explode and then re bale them
sticky
Member
- Location
- Near Stratford upon Avon
A friend has been cutting my wheat the last couple of days.
- Location
- Moreton-in-Marsh, Glos
Blimey! I didn’t know my combine has an inclinometer.
But at a guess, I’d say that some of it is 1 in 4.
It really hurts your ankles trying to walk up it!
- Location
- southern riverina Australia
Made a start on south wall. Will wait till mid week to finish it off after concrete is done.
- Location
- NSW, Newstralya
youve had some rain
Nearly
Member
- Location
- North of York
Precious metal.
- Location
- south norfolk
How much each are the bits you are welding on and do you need special rods or wire
nick…
Nearly
Member
- Location
- North of York
They cost £18 each 2 years ago. Probably double that for 3 tiles now.
Spot welded on with mig and left to cool before doing a run up each side, cooling in between.
They've been under the weld bench for a year.
Spot welded on with mig and left to cool before doing a run up each side, cooling in between.
They've been under the weld bench for a year.
- Location
- southern riverina Australia
8mm over 3 days and a couple of mm's in showery shìť today.
for Thursday and Friday this week coming.
- Location
- southern riverina Australia
- Location
- NSW, Newstralya
8mm over 3 days and a couple of mm's in showery shìť today.
we had 40 mm Thursday night
- Location
- Lincs / Cambs border
Local drainage board doing an excellent job as usual . It’s quite easy going for the mowers in this dry weather and no damage to the fields .
- Location
- southern riverina Australia
- Location
- South West
Sprayer boom to low