Topcon Boundary help

[Banana Bar]

I have lost the boundary from one of the fields in our Topcon X30 on the Rogator. How do I create a new boundary? It doesn't seem very intuitive!
Thank you

BB

 

[Northern farmer]

You do not have the manual? Buttons may not be exactly obvious but no harm trying what they do and then you can master it without the manual too.

 

[Wombat]

I think on some of the newer software you can do boundary round coverage as well

 

[Robt]

On your c3000 you can make boundary from coverage . On right hand side , row of buttons , top right is field menu, press that then either press the record icon (red square with arrow around it ) or at bottom of list is “boundary from coverage . The trick is to press the menu button then press the “i” button and it puts a question mark on each button . Press each button and it tells you what it does! Press “I” again and button becomes active .... simples

 

[Banana Bar]

On your c3000 you can make boundary from coverage . On right hand side , row of buttons , top right is field menu, press that then either press the record icon (red square with arrow around it ) or at bottom of list is “boundary from coverage . The trick is to press the menu button then press the “i” button and it puts a question mark on each button . Press each button and it tells you what it does! Press “I” again and button becomes active .... simples

Thank you. Be good if you could drop in at some point.

 

[Robt]

Sadly I no longer work for and support topcon or indeed Agco as you know. If I’m passing I’ll drop in .