Topcon x30 updates

[Northern farmer]

"Access denied" for me too.

 

[Simon Robbins]

Well, it is June already. Let's check the availability of the support site again: hmm, it still says ' Access Denied'
Is anybody out there who is able to get updates from this site? or everybody has the same error message?
@Simon Robbins ? @Robt ?

Hi I am presuming you have registered your product and are trying the update through the following link, let me know as i can get in no problem. https://www.topconpositioning.com/support/updates

 

[lricsi]

Hi I am presuming you have registered your product and are trying the update through the following link, let me know as i can get in no problem. https://www.topconpositioning.com/support/updates

Hi, thank you for your feedback!
My products are registered (Agi4 and X30) and I was able to download an update once this February or March, but since then I always get 'site unavailable or Access denied' error message.
As @Northern farmer reported not I am the only one, so if you have any idea what is behind or could forward this issue to the support team in charge, would be great!
Alternatively a different download link or file sharing link with the latest X30 update file would be highly appreciated!

 

[Northern farmer]

Actually it was the direct link that gave me "access denied". Now I can log in but I cannot test the X30 updates availability as I don't have that product registered.

 

[lricsi]

Hi I am presuming you have registered your product and are trying the update through the following link, let me know as i can get in no problem. https://www.topconpositioning.com/support/updates

Btw I tried to register my products again (created a new account just for testing), but the drop-down menu at the product category does not contains 'Agricultural solutions' (don't remember the original category name exactly) anymore. You can not choose X30 or AGi4...or any Ag related product. see pic

 

[Pheasant Surprise]

I'm not sure what they see the point of registering receiver and equipment is just to get firmware updates is? Are they worried the Chinese might reverse engineer it or something

At least I can still get hold of TRU from them to hack the Topcon receiver/radios in my tractors.

 

[Robt]

It's very important as the x30 is available in as a c3000 from agco ( brand locked with different software) an amapad from amazone (again brand locked) people all call it an x30 but if you try to put agco software on an aftermarket full feature x30 it will lock it and it won't work!

 

[Northern farmer]

But it would not kill Topcon devices. Sure there are many farmers who have both AGCO and Topcon gear, the confusion would still be possible. Odd if AGCO receivers do not check the SW compatibility. Most often it is not possible to update wrong SW, from a different brand or the same brand but different product (the latter being a more likely scenario for confusion).

 

[Robt]

Like I said, you can't load Topcon software version onto agco c3000 screen! The screen is brand locked to agco only. Software updates are then handled though your agco supplier . C3000 has a lot of features removed thus making it cheaper ans less future proofed than the x30 or now new x35

 

[Northern farmer]

I'm not after Topcon SW on an AGCO C3000 screen. I was wondering why Topcon insists on device registration before they share the SW. The argument about a confused AGCO screen user does not sound right to me.

 

[lricsi]

Could you please somebody share a download link to the latest X30 Sw version ( 3.24.xx)?

 

[DangerRanger]

I've given up trying, regretting buying the topcon and probably should have bought the agleader instead

 

[Robt]

Danger ranger. Have you registered on www.mytopcon.com? Have you spoken to your dealer?
Pm me if you prefer

 

[croppers]

I have to sympathise with @DangerRanger

@Robt if you go onto https://www.topconenterprise.com/pr...om/en-gb/support&retLabel=Return to myTopcon#

Presuming that's the correct section, what product category do you select to bring up say an X30 in the product selection drop down list?

Perhaps I'm just not grasping the nettle...

 

[Robt]

Topcon care, agriculture, consoles, x30?

 

[croppers]

Topcon care re-directs you to https://www.topconpositioning.com/support to register products

In Topconenterprise.com , updates, register, new product, No agriculture or X30 and if you search for x30 still nothing?

 

[croppers]

or https://www.topconenterprise.com/pr...m/support/updates&retLabel=Return to myTopcon

 

[lricsi]

or https://www.topconenterprise.com/products?action=new-product&retURL=https://www.topconpositioning.com/support/updates&retLabel=Return to myTopcon

well, check my post #25 from 13. June.
I was talking about the support site, where you can not choose Ag related products anymore....

 

[croppers]

Hi I am presuming you have registered your product and are trying the update through the following link, let me know as i can get in no problem. https://www.topconpositioning.com/support/updates

If you can do it no problem please can you detail how you register an agricultural X30 on the link you provided please?

The replies seem to have dwindled on this thread and I have my suspicions why.....

 

[Bumble Bee]

If you can do it no problem please can you detail how you register an agricultural X30 on the link you provided please?

The replies seem to have dwindled on this thread and I have my suspicions why.....

I tried over the weekend and didn't have any success either. We await with baited breath.