Transmission or hydraulic dip stick?

[RLSPlant]

Hi all,

Can anyone identify this dip stick, is it transmission or hydraulic level?

Thanks Robert

 

[onthehoof]

Transmission
Hydraulic usually has sight gauge on outside of tank

 

[Jontym]

Definitely transmission.

 

[RLSPlant]

Thanks all, found the hydraulic one, is in the hydraulic tank cap

 

[ACEngineering]

Hi all,

Can anyone identify this dip stick, is it transmission or hydraulic level?

Thanks Robert View attachment 764918View attachment 764920

Its transmission dipstick. Take it out and clean it then paint it white or black so oil shows up easier.
Run machine few minutes stop and check level straight away.

Looks very oily around there? It may be over full and blowing it out dipstick?

 

[RLSPlant]

Its transmission dipstick. Take it out and clean it then paint it white or black so oil shows up easier.
Run machine few minutes stop and check level straight away.

Looks very oily around there? It may be over full and blowing it out dipstick?

Thanks, needs a top up then

The oily shine on everything is my fault, went wild with the WD40, saves anything rusting

 

[feilding]

Thanks, needs a top up then

The oily shine on everything is my fault, went wild with the WD40, saves anything rusting

Don't put wd40 on anything rubber, hoses etc, it will make them soft or swell and burst, I would degrease / wash it off if not to late. [emoji20]

 

[Timbo]

Trans Oil is a 10w-30 specific JCB transmission oil (at least it is for my 531 6 speeder) rather than red ATF. The filter is reached thro a wee bolt off panel under the boom.

Defo degrease all that WD40 off the rubber parts etc. Engine bay wants to be dry and dust free.

 

[davidroberts30]

Trans Oil is a 10w-30 specific JCB transmission oil (at least it is for my 531 6 speeder) rather than red ATF. The filter is reached thro a wee bolt off panel under the boom.

Defo degrease all that WD40 off the rubber parts etc. Engine bay wants to be dry and dust free.

Morrises terain ct10 I use

 

[Timbo]

Morrises terain ct10 I use

Any idea what that would cross ref to an Exol flavour?

 

[davidroberts30]

Any idea what that would cross ref to an Exol flavour?

there's the spec list

 

[Timbo]

Thanks! Looks like a 10 30 and 50 are in order of increasing "robustness"