Similar problem to what I'm having certain weights make it shake and at different speeds had one tyre that had 2 lugs 50% worn then the one next to it was like new. Trelleborg rep said there was nothing wrong with it.I’ve got 710-75R42 and 650-65R34 Trelleborg tyres on a 500 hr 936 and at low speeds they shake the tractor. If you have any weight on the tractor the problem is amplified and quite frankly unacceptable.
They are Shyte, Fendt fit them as standard, I paid for Michelin’s on the 936’s, have bought some secondhand Fendts with trelleborgs and the sidewalls are cracking on both and leaking air with 50% tread left, junkkkkkkkkk.
Having to get rid of a tyre on 40_50% isnt an issue IF they have done a decent amount of hours and out lasted a softer compound tyre.Only ever had one set of trelleborg tyres and I hope its the only set I ever have. Had to scrap them at around 40% because of the side walls cracking just behind the lugs.
Constantly plagued with burst's
Had said tractor out bringing machinery back home and within an hr I had 3 flat tyres- that was the end of my trelleborg experience.
The one that still has 40% and hasn't got cracked sidewalls.....So if a Michelin and trellberg cost the same, but at 3000 hrs the Michelin is bald but the trellberg has 40 % but sidewalls have gone.
Which is the best tyre?
BKT s are being taken off locally at 30-40% because they just will not grip.The one that still has 40% and hasn't got cracked sidewalls.....
Think it's called the bkt?
Had to change a set of 40% tm700 last year because they were cracked at every lug. Mind you, they were 9 year old....