Trimble/agleader combination auto steer

[Carrot Kid]

Have a tractor here running a Trimble 262 receiver and nav controller but operated through an agleader insight screen.

System is 10 years old now, originally fitted to a tractor that wasn't available factory ready for auto guidance.

I'm wondering if the Trimble kit would be compatible to work directly with an auto guidance ready New Holland through the intelliview screen?

 

[Slick]

Should be, although some old nav controllers can't (rev D or earlier ish) can't be upgraded for autoguide ready applications.

 

[GPS_Support_2014]

The 262 will work with the IntelliView screen
The NAV Controller is probably Trimble branded and that will not work with the IntelliView screen. It can be converted to a CNH Branded NAV for less than £200 (I think). Check with a CNH dealer.

Note: A CNH branded NAV also has a Trimble logo on it so it's difficult to identify which one it is. Post a photo of the complete serial number label on the NAV and should be able to advise

 

[Carrot Kid]

Thanks for the info, will get a closer look at the nav soon.