Trimble FM750 Yellow Signal

Bealy

New Member
Hi, Ive just bought a new to me Trimble FM750 and I can't get green signal, only two bars, yellow..

It's a 2014 screen, v7.35 on WAAS (no glonass), its seeing 10 satellites or 13 if set to use uncorrected satellites. Obviously today was very overcast, dunno if that makes much difference. Any ideas?

Thanks
 

Tractor Tim

Member
Arable Farmer
10 to 13 satellites should be fine. Are you out side or in a shed? Mine sometimes does the same usually give it five minutes then open or create a field and when you return to the work screen it sorts itself out if you are stuck I have always found the main dealer helpful can't just remembered their name
 

Bealy

New Member
10 to 13 satellites should be fine. Are you out side or in a shed? Mine sometimes does the same usually give it five minutes then open or create a field and when you return to the work screen it sorts itself out if you are stuck I have always found the main dealer helpful can't just remembered their name

Vantage UK it is Ben I deal with.
Thanks, ill give them a try, although I didnt buy it off them. Tried it outside away from shed, still no luck.
 

Slick

Member
Location
Beds
Go into your GNSS settings and check that satelittes 123, 126 and 136 are enabled.
You may need a firmware update to get 136.
 

Bealy

New Member
Go into your GNSS settings and check that satelittes 123, 126 and 136 are enabled.
You may need a firmware update to get 136.
I'm not sure how to do that, on 'Satellite Status' none of those are are listed, I'll ring up vantage tomorrow and see about an update. Thanks
 

New Fuel Supplier On The Way

  • 293
  • 2
Farmdeals is very pleased to announce that Exswift Limited will soon be joining our digital online platform. Exswift deliver all types of fuel to numerous locations around Essex and further a field. We will keep you updated as to when they go live. Farmdeals.ag powered by The Farming Forum & FutureFarm. #farming #workinghard #inittogether

Exswift lorry2.jpg
Top