Trimble GFX 750 help

[Happy]

Glad you’ve posted that pic we just had our system transferred onto a new 7718 I mentioned getting a switch fitted which vantage said they could do for us if we wanted so it’s good that it works well and doesn’t look out of place

Guy that fitted it put it just in the right place. Palm of your hand on the side of the armrest and your thumb is right on it without even having to think about it.

Will need to get my duster going though. Did all the spring sowing with no air con. Thank goodness those old cabs still have side windows

 

[Lofty1984]

Guy that fitted it put it just in the right place. Palm of your hand on the side of the armrest and your thumb is right on it without even having to think about it.

Will need to get my duster going though. Did all the spring sowing with no air con. Thank goodness those old cabs still have side windows

Couldn’t agree more been fighting a stinking cold and those side windows are a blessing for plenty of fresh air

 

[Farma Parma]

We have an engagement button on the tractor joystick.
When Fert spreading, spraying or using the pronto drill I can be travelling at 10k ish when wanting to engage the auto steer.

surely ya not turning in tho at 10kph, christ id tip the tractor over trying that here.
Just ease off a bit & should be fine. unless you have something not set right ??

 

[Grassman247]

Sorry to hijack the thread, having trouble getting my 750 to pickup egnos satellites, can be waiting for up to half an hour before it decides to start working, will show between 8 and 15 satellites but the active gnss will show not ready so it won’t let the KRM work on the section control and auto shutoff, anyone any ideas? I’m wondering if the antenna is dodgy, will probably have to pay for a subscription and got to RTK

this is what it shows on startup

 

[Slick]

What have you got your position quality set to?

 

[Grassman247]

What have you got your position quality set to?

Favour availability but have tried the other 2 but no difference

 

[Lofty1984]

Favour availability but have tried the other 2 but no difference

Get up and fiddle with the receiver we had an issue last year gave the wire a wiggle and it cured it

 

[Grassman247]

Get up and fiddle with the receiver we had an issue last year gave the wire a wiggle and it cured it

Tried that, took it off cleaned the connectors on both ends and still no better

 

[Slick]

How many satellites does it track if you set it to autonomous?

 

[Slick]

You could also try a free 3 day RangePoint RTX demo, if that works there is nothing wrong with your antenna.
Assuming it is an AG-25 and not an AG-15.
What firmware is the display on?

 

[Grassman247]

You could also try a free 3 day RangePoint RTX demo, if that works there is nothing wrong with your antenna.
Assuming it is an AG-25 and not an AG-15.
What firmware is the display on?

Firmware is the latest version as updated it last week to the final one, it can track up to 18 satellites on auto but still won’t lock on until after a long time, think I’m going to have to try the free trial to see if it is the antenna

 

[B'o'B]

Firmware is the latest version as updated it last week to the final one, it can track up to 18 satellites on auto but still won’t lock on until after a long time, think I’m going to have to try the free trial to see if it is the antenna

The other thing to check is which EGNOS satellite it is set to look for. I afraid its a long time since I worked with a CFX so I really can't remember where to look now.

 

[Flatlander]

Try driving around a bit. Mine did it late one night while drilling. Jumped out fir a pee and a walk around to check everything in the dark as that’s when sh1t happens. Went to go back drilling but no auto steer, sat waiting for a while but no luck getting. turned it on and off a couple of time still nothing. started driving back towards the entrance and got a few hundred feet and it was back on. Happened a few times now. Move positions and it kicks bavk on.

 

[Spear]

I have fields that I have lots of trouble with due to Wi-Fi broadband masts nearby. They wipe my signal for a fraction of a second every few seconds. As soon as out of line of sight or far enough away everything goes back to normal

 

[Vantage ASC - Richard]

Afternoon All,

If youv'e got a Trimble system that you want to be working to its optimum, or just need some driver training please have a look at our latest offer;

https://vantage-ag.uk/product/vantage-health-check/

 

[db9go]

Afternoon All,

If youv'e got a Trimble system that you want to be working to its optimum, or just need some driver training please have a look at our latest offer;

https://vantage-ag.uk/product/vantage-health-check/

I have tried to subscribed to your news letter this is what i got

404​

We're very sorry but the requested resource can't be found
Take me home

 

[Vantage ASC - Richard]

I have tried to subscribed to your news letter this is what i got

404​

We're very sorry but the requested resource can't be found
Take me home

Thanks for the up-date, I've tried this morning and both links are working, if you wouldn't mind trying again please? I'll pass this on to be investigated though.

 

[meugeniu]

How do I connect a Trimble GFX-750 to CCI 800 terminal via RS-232 Cable ? are any adaptors to trimble terminal so I could connect mine from CCI ?

 

[Slick]

Expansion port multi use. p/n 114078