Steevo
Member
- Location
- Gloucestershire
Please could you quote me for the following cables for a 750 + EZ-Pilot:
All three cables that plug into the rear of the display (square, oblong and aerial)
Sonalert cable
Sonalert
I already have the battery wiring loom, and the "emergency stop" button looms in machines but am considering adding the remaining cables to enable me to just swap the display, motor, T3 and aerial from one to another by just unplugging from one machine and moving them straight over to plug in again.
thanks
@AS_Comms
All three cables that plug into the rear of the display (square, oblong and aerial)
Sonalert cable
Sonalert
I already have the battery wiring loom, and the "emergency stop" button looms in machines but am considering adding the remaining cables to enable me to just swap the display, motor, T3 and aerial from one to another by just unplugging from one machine and moving them straight over to plug in again.
thanks
@AS_Comms