Trying to get Trimble GFX750 to talk to RDS Artemis box

Rob Holmes

Moderator
BASIS
Trying to get the Trimble to send a speed signal to the Artemis box, so far I have done without success:

Set the Artemis box to GPS only in top port
Matched to baud rate of both boxes

What else do I need to do?
 

TomR

New Member
@Rob Holmes , if you have a PSi Artemis, with a keypad on the right hand side of the display, you can't use GPS for forward speed unfortunately. It is only used for position when running a VRT map from the SD card. With this system the only option is to use a radar or similar pulsed speed signal. We have a Satspeed receiver which converts a GPS receiver signal into a pulsed output which can be used as another option.
The later touchscreen Artemis head unit can be setup for GPS forward speed, but from your description it sounds like the non-touchscreen version you have.
 

SFI - What % were you taking out of production?

  • 0 %

    Votes: 79 42.9%
  • Up to 25%

    Votes: 63 34.2%
  • 25-50%

    Votes: 30 16.3%
  • 50-75%

    Votes: 3 1.6%
  • 75-100%

    Votes: 3 1.6%
  • 100% I’ve had enough of farming!

    Votes: 6 3.3%

Red Tractor drops launch of green farming scheme amid anger from farmers

  • 1,287
  • 1
As reported in Independent


quote: “Red Tractor has confirmed it is dropping plans to launch its green farming assurance standard in April“

read the TFF thread here: https://thefarmingforum.co.uk/index.php?threads/gfc-was-to-go-ahead-now-not-going-ahead.405234/
Top